diff options
Diffstat (limited to 'tools/kaleidoscope-builder')
| -rwxr-xr-x | tools/kaleidoscope-builder | 313 |
1 files changed, 0 insertions, 313 deletions
diff --git a/tools/kaleidoscope-builder b/tools/kaleidoscope-builder deleted file mode 100755 index 6c984e5..0000000 --- a/tools/kaleidoscope-builder +++ /dev/null @@ -1,313 +0,0 @@ -#! /bin/sh - -set -e - -firmware_size () { - ## This is a terrible hack, please don't hurt me. - algernon - - MAX_PROG_SIZE=28672 - - output="$($@ | grep "\\(Program\\|Data\\):" | sed -e 's,^, - ,' && echo)" - - PROGSIZE="$(echo "${output}" | grep Program: | cut -d: -f2 | awk '{print $1}')" - - PERCENT="$(echo ${PROGSIZE} ${MAX_PROG_SIZE} | awk "{ printf \"%02.01f\", \$1 / \$2 * 100 }")" - - echo "${output}" | sed -e "s,\(Program:.*\)(\([0-9\.]*%\) Full),\1(${PERCENT}% Full)," -} - -find_sketch () { - if [ -e "${SOURCEDIR}/.kaleidoscope-builder.conf" ]; then - . "${SOURCEDIR}/.kaleidoscope-builder.conf" - fi - - SKETCH="${SKETCH:-${DEFAULT_SKETCH}}" - LIBRARY="${LIBRARY:-${SKETCH}}" - - for path in "hardware/keyboardio/avr/libraries/Kaleidoscope-${LIBRARY}/examples/${SKETCH}" \ - "examples/${LIBRARY}" \ - "src" \ - "." ; do - if [ -f "${path}/${SKETCH}.ino" ]; then - echo "${path}" - return - fi - done - exit 1 -} - -prepare_to_flash () { - if [ ! -e "${HEX_FILE_PATH}" ]; then - compile - fi - - echo "Press ENTER when ready..." - read a -} - -flash () { - prepare_to_flash - reset_device - sleep 3s - flash_over_usb - -} - -flash_over_usb () { - avrdude -q -q -p${MCU} -cavr109 -D -P ${DEVICE_PORT_BOOTLOADER} -b57600 "-Uflash:w:${HEX_FILE_PATH}:i" - -} - -program() { - prepare_to_flash - flash_with_programmer -} - -flash_with_programmer() { - - avrdude -v \ - -p${MCU} \ - -cusbtiny \ - -D \ - -B 1 \ - "-Uflash:w:${HEX_FILE_PATH}:i" -} - -hex_with_bootloader () { - if [ ! -e "${HEX_FILE_PATH}" ]; then - compile - fi - - cat ${HEX_FILE_PATH} | awk '/^:00000001FF/ == 0' > ${HEX_FILE_WITH_BOOTLOADER_PATH} - echo "Using ${BOOTLOADER_PATH}" - ${MD5} ${BOOTLOADER_PATH} - cat ${BOOTLOADER_PATH} >> ${HEX_FILE_WITH_BOOTLOADER_PATH} - cat <<EOF - -Combined firmware and bootloader are now at ${HEX_FILE_WITH_BOOTLOADER_PATH} -Make sure you have the bootloader version you expect. - -And TEST THIS ON REAL HARDWARE BEFORE YOU GIVE IT TO ANYONE - -EOF -} - -build () { - compile $@ - size $@ -} - -compile () { - install -d "${OUTPUT_PATH}" - - echo "Building ${OUTPUT_DIR}/${SKETCH} (${LIB_VERSION}) ..." - - ${compile_HOOKS} - - if [ -d "${ARDUINO_LOCAL_LIB_PATH}/libraries" ]; then - local_LIBS="-libraries \"${ARDUINO_LOCAL_LIB_PATH}/libraries\"" - fi - - ${ARDUINO_BUILDER} \ - -compile \ - -hardware "${ARDUINO_PATH}/hardware" \ - -hardware "${BOARD_HARDWARE_PATH}" \ - ${ARDUINO_TOOLS_PARAM} \ - -tools "${ARDUINO_PATH}/tools-builder" \ - -fqbn "${FQBN}" \ - ${local_LIBS} \ - -libraries "${BOARD_HARDWARE_PATH}/.." \ - -libraries "${ROOT}" \ - ${EXTRA_BUILDER_ARGS} \ - -build-path "${BUILD_PATH}" \ - -ide-version "${ARDUINO_IDE_VERSION}" \ - -warnings all \ - ${ARDUINO_VERBOSE} \ - -prefs "compiler.cpp.extra_flags=-std=c++11 -Woverloaded-virtual -Wno-unused-parameter -Wno-unused-variable -Wno-ignored-qualifiers" \ - ${ARDUINO_AVR_GCC_PREFIX_PARAM} \ - "$(find_sketch)/${SKETCH}.ino" - - cp "${BUILD_PATH}/${SKETCH}.ino.hex" "${HEX_FILE_PATH}" - cp "${BUILD_PATH}/${SKETCH}.ino.elf" "${ELF_FILE_PATH}" - ln -sf "${OUTPUT_FILE_PREFIX}.hex" "${OUTPUT_PATH}/${SKETCH}-latest.hex" - ln -sf "${OUTPUT_FILE_PREFIX}.elf" "${OUTPUT_PATH}/${SKETCH}-latest.elf" - rm -rf "${BUILD_PATH}" -} - -_find_all () { - for plugin in hardware/keyboardio/avr/libraries/Kaleidoscope-*/examples/* \ - examples/* \ - src/*.ino; do - if [ -d "$(dirname ${plugin})" ] || [ -f "${plugin}" ]; then - p="$(basename "${plugin}" .ino)" - if [ "${p}" != '*' ]; then - echo "${p}" - fi - fi - done | sort -} - -build_all () { - plugins="$(_find_all)" - - for plugin in ${plugins}; do - export SKETCH="${plugin}" - export LIBRARY="${plugin}" - $0 ${plugin} build - done -} - -size () { - if [ ! -e "${HEX_FILE_PATH}" ]; then - compile - fi - - echo "- Size: firmware/${LIBRARY}/${OUTPUT_FILE_PREFIX}.elf" - firmware_size "${AVR_SIZE}" -C --mcu="${MCU}" "${ELF_FILE_PATH}" - echo -} - -size_map () { - if [ ! -e "${HEX_FILE_PATH}" ]; then - compile - fi - - "${AVR_NM}" --size-sort -C -r -l "${ELF_FILE_PATH}" -} - -decompile () { - - if [ ! -e "${HEX_FILE_PATH}" ]; then - compile - fi - - "${AVR_OBJDUMP}" -d "${ELF_FILE_PATH}" -} - -clean () { - rm -rf "${OUTPUT_PATH}" -} - -reset_device () { - ${RESET_DEVICE} -} - -usage () { - cat <<EOF -Usage: $0 SKETCH commands... - -Runs all of the commands in the context of the Sketch. - -Available commands: - - help - This help screen. - - compile - Compiles the sketch. - - size - Reports the size of the compiled sketch. - - build - Runs compile and report-size. - - clean - Cleans up the output directory. - - size-map - Displays the size map for the sketch. - - decomple - Decompile the sketch. - - reset-device - Reset the device. - - flash - Flashes the firmware using avrdude. - - build-all - Build all Sketches we can find. -EOF -} - -help () { - usage -} - -if [ $# -lt 1 ]; then - usage - exit 1 -fi - -## Parse the command-line -## - anything that has a =, is an env var -## - from the remaining stuff, the first one is the Library/Sketch -## - everything else are commands -## -## - if there is only one argument, that's a command - -ROOT="$(cd $(dirname $0)/..; pwd)" -export ROOT -export SOURCEDIR="$(pwd)" - -if [ -e "${HOME}/.kaleidoscope-builder.conf" ]; then - . "${HOME}/.kaleidoscope-builder.conf" -fi - -if [ -e "${SOURCEDIR}/.kaleidoscope-builder.conf" ]; then - . "${SOURCEDIR}/.kaleidoscope-builder.conf" -fi - - -. ${ROOT}/tools/settings.sh - - -cmds="" - -## Export vars -for i in $(seq 1 $#); do - v="$1" - shift - - case "${v}" in - *=*) - export ${v} - ;; - *) - cmds="${cmds} ${v}" - ;; - esac -done - -set -- ${cmds} - -if [ $# -eq 1 ]; then - cmd="$(echo $1 | tr '-' '_')" - ${cmd} - exit $? -fi - -SKETCH="$1" -shift - -if [ "${SKETCH}" = "default" ]; then - SKETCH="${DEFAULT_SKETCH}" -fi - -cmds="" - -for i in $(seq 1 $#); do - cmds="${cmds} $(echo $1 | tr '-' '_')" - shift -done - -LIBRARY="${SKETCH}" - -export SKETCH -export LIBRARY - -for cmd in ${cmds}; do - ${cmd} -done |