# Keyboardio Model 01 Firmware The default firmware for the Keyboardio Model 01 # Download and install ## Set up the Arduino IDE Setup the Arduino IDE on your system. Make sure you install at least version 1.6, since older version may not support all required features. ## macOS On macOS, install the Arduino IDE using [homebrew](http://brew.sh/) [cask](https://caskroom.github.io/) with `brew cask install arduino` or download the application from [the official website](https://www.arduino.cc/en/Main/Software) and move it to your `/Applications` folder. ### Linux On Linux, your distribution's package manager probably includes the Arduino IDE, but it may be an out of date version. If your distribution installs a version of Arduino before 1.6.3 or so, you'll need to install the Arduino IDE following the instructions [on the wiki](https://github.com/keyboardio/Kaleidoscope/wiki/Arduino-Setup-Linux), installing the Arduino package somewhere that 'arduino' and 'arduino-builder' end up in your $PATH ## Create and navigate to the Arduino Sketchbook directory ### MacOS ```sh mkdir -p $HOME/Documents/Arduino cd $HOME/Documents/Arduino ``` ### Linux ```sh mkdir -p $HOME/Arduino cd $HOME/Arduino ``` ## Download hardware platform, including library source code ```sh mkdir -p hardware/keyboardio ## then clone the hardware definitions to make them available to the arduino environment git clone --recursive https://github.com/keyboardio/Arduino-Boards.git hardware/keyboardio/avr ```` ## Download the Model 01 Firmware ```sh git clone https://github.com/keyboardio/Model01-Firmware.git ``` # Build and flash the firmware from the commandline ```sh cd Model01-Firmware make flash ``` When the builder tells you to hit Enter to continue, hold down "Prog" on your keyboard and hit Enter. # Thanks! <3 jesse [![Build Status](https://travis-ci.org/keyboardio/Model01-Firmware.svg?branch=master)](https://travis-ci.org/keyboardio/Model01-Firmware)