diff options
| author | Brian Cully <bjc@kublai.com> | 2019-08-11 13:06:14 -0400 |
|---|---|---|
| committer | Brian Cully <bjc@kublai.com> | 2019-08-11 13:06:14 -0400 |
| commit | d4d1af6a7bce0a9d99faa4d5704211e18b2843ee (patch) | |
| tree | d4cd605f77bfcc94be41b965e167b287971ffc1b /README.md | |
| parent | c2d0f2af2f21a3c9539b89749bf6139c9f15b903 (diff) | |
| download | atsamd-usb-host-d4d1af6a7bce0a9d99faa4d5704211e18b2843ee.tar.gz atsamd-usb-host-d4d1af6a7bce0a9d99faa4d5704211e18b2843ee.zip | |
Update README.
Don't need special branch anymore.
Diffstat (limited to 'README.md')
| -rw-r--r-- | README.md | 10 |
1 files changed, 3 insertions, 7 deletions
@@ -16,18 +16,14 @@ You'll need at least `bossac` installed somewhere in your path in order to actually do the flashing. You'll also need rust installed for your target device. -1) Grab the above branch and stick it one directory level up (e.g., if -this is checked out into `~/src/atsamd-usb-host` the `atsamd-hal` -checkout should be in `~/src/atsamd`). - -2) Connect a serial port to your device (the Trinket M0 uses pin 4 to +1) Connect a serial port to your device (the Trinket M0 uses pin 4 to do UART transmission at TTL voltage). -3) Plug the device in, put it into firmware-update mode (double-tap +2) Plug the device in, put it into firmware-update mode (double-tap the reset button on the Trinket M0) and run `make flash`. When it's done you should see boot messages on your serial device. -4) Unplug the device from the computer, hook it up to another power +3) Unplug the device from the computer, hook it up to another power supply somehow (I wire GND to ground and USB to 5V), plug in a keyboard, and hit some keys. You should see it print out the keyboard reports as keys are pressed and released. Alternately, you may see |