aboutsummaryrefslogtreecommitdiffstats
path: root/examples/simple
diff options
context:
space:
mode:
Diffstat (limited to 'examples/simple')
-rw-r--r--examples/simple/logger.rs139
-rw-r--r--examples/simple/macros.rs15
-rwxr-xr-xexamples/simple/main.rs189
-rw-r--r--examples/simple/rtc.rs74
4 files changed, 0 insertions, 417 deletions
diff --git a/examples/simple/logger.rs b/examples/simple/logger.rs
deleted file mode 100644
index 9fbba77..0000000
--- a/examples/simple/logger.rs
+++ /dev/null
@@ -1,139 +0,0 @@
-use crate::rtc;
-use starb::{Reader, RingBuffer, Writer};
-
-use core::cell::UnsafeCell;
-use core::fmt::{self, Write};
-use embedded_hal::{digital::v2::OutputPin, serial};
-use log::{Metadata, Record};
-use trinket_m0::{
- gpio::{Pa6, Pa7, PfD},
- sercom::{Sercom0Pad2, Sercom0Pad3, UART0},
-};
-
-static mut UART0: usize = 0;
-
-struct JoinedRingBuffer<'a> {
- lbr: Reader<'a, u8>,
- lbw: Writer<'a, u8>,
-}
-
-impl<'a> JoinedRingBuffer<'a> {
- const fn new(rb: &'a RingBuffer<u8>) -> Self {
- let (lbr, lbw) = rb.split();
- Self { lbr: lbr, lbw: lbw }
- }
-}
-
-impl fmt::Write for JoinedRingBuffer<'_> {
- fn write_str(&mut self, s: &str) -> Result<(), fmt::Error> {
- for b in s.bytes() {
- if let Err(_) = self.lbw.unshift(b) {
- // Ignore buffer full errors for logging.
- return Ok(());
- }
- }
- Ok(())
- }
-}
-
-static mut LB: RingBuffer<u8> = RingBuffer::<u8>::new();
-static mut JRB: JoinedRingBuffer = unsafe { JoinedRingBuffer::new(&LB) };
-
-// The UART isn't necessarily Sync, so wrap it in something that
-// is. As long as flush() is only called from one thread, we're fine,
-// but this is a guarantee that the logger module doesn't make.
-pub struct WriteWrapper<W> {
- w: W,
-}
-impl<W> WriteWrapper<W>
-where
- W: serial::Write<u8>,
-{
- pub fn new(writer: W) -> Self {
- Self { w: writer }
- }
-}
-unsafe impl<W> Sync for WriteWrapper<W> {}
-
-pub struct SerialLogger<W, L> {
- writer: UnsafeCell<WriteWrapper<W>>,
- led: UnsafeCell<L>,
-}
-
-impl<W, L> SerialLogger<W, L>
-where
- W: serial::Write<u8>,
- L: OutputPin + Send + Sync,
-{
- pub fn new(writer: WriteWrapper<W>, led: L) -> Self {
- // Stash this for unsafe usage in case there's an issue with
- // the rest of the logging.
- unsafe { UART0 = core::mem::transmute(&writer.w) };
- Self {
- writer: UnsafeCell::new(writer),
- led: UnsafeCell::new(led),
- }
- }
-}
-unsafe impl<W, L> Send for SerialLogger<W, L> {}
-unsafe impl<W, L> Sync for SerialLogger<W, L> {}
-
-impl<W, L> log::Log for SerialLogger<W, L>
-where
- W: serial::Write<u8>,
- L: OutputPin + Send + Sync,
-{
- fn enabled(&self, metadata: &Metadata) -> bool {
- metadata.level() <= log::max_level()
- }
-
- fn log(&self, record: &Record) {
- if !self.enabled(record.metadata()) {
- return;
- }
-
- let jrb = unsafe { &mut JRB };
- write!(
- jrb,
- "[{}] {} {} -- {}\r\n",
- rtc::millis(),
- record.level(),
- record.target(),
- record.args()
- )
- .ok();
- }
-
- fn flush(&self) {
- // Unsafe due to mutable static. We can only deal with the
- // tail position of the buffer here to keep things safe.
- let jrb = unsafe { &mut JRB };
- if jrb.lbr.is_empty() {
- return;
- }
-
- let led = unsafe { &mut (*self.led.get()) };
- let writer = unsafe { &mut (*self.writer.get()) };
-
- led.set_high().ok();
- while let Some(b) = jrb.lbr.shift() {
- nb::block!(writer.w.write(b)).ok();
- }
- led.set_low().ok();
- }
-}
-
-// Write to the UART right now, instead of putting it on a ring
-// buffer. This function is a huge hack, and only useful for debugging
-// either before the main loop starts or if the ring buffer is broken.
-pub unsafe fn write_fmt_now(args: fmt::Arguments, nl: bool) {
- if UART0 == 0 {
- return;
- }
- let uart: &mut UART0<Sercom0Pad3<Pa7<PfD>>, Sercom0Pad2<Pa6<PfD>>, (), ()> =
- core::mem::transmute(UART0);
- fmt::write(uart, args).expect("writing fmt now to uart");
- if nl {
- uart.write_str("\r\n").expect("writing nl now to uart");
- }
-}
diff --git a/examples/simple/macros.rs b/examples/simple/macros.rs
deleted file mode 100644
index 46d2d07..0000000
--- a/examples/simple/macros.rs
+++ /dev/null
@@ -1,15 +0,0 @@
-#[macro_export]
-macro_rules! logln_now {
- ($($arg:tt)*) => {
- unsafe {crate::logger::write_fmt_now(format_args!($($arg)*), true);}
- };
- (_) => {};
-}
-
-#[macro_export]
-macro_rules! log_now {
- ($($arg:tt)*) => {
- unsafe {crate::logger::write_fmt_now(format_args!($($arg)*), false);}
- };
- (_) => {};
-}
diff --git a/examples/simple/main.rs b/examples/simple/main.rs
deleted file mode 100755
index 8fbf0ea..0000000
--- a/examples/simple/main.rs
+++ /dev/null
@@ -1,189 +0,0 @@
-#![no_std]
-#![no_main]
-
-mod logger;
-mod macros;
-mod rtc;
-
-use atsamd_usb_host::SAMDHost;
-use bootkbd::BootKeyboard;
-use clint::HandlerArray;
-use cortex_m::asm::wfi;
-use cortex_m_rt::{entry, exception, ExceptionFrame};
-use embedded_hal::digital::v2::OutputPin;
-use log::{debug, info, LevelFilter};
-use trinket_m0::{
- self as hal,
- clock::GenericClockController,
- gpio::{OpenDrain, Output, Pa10, Pa6, Pa7, PfD},
- sercom,
- target_device::{interrupt, Interrupt},
- time::*,
- CorePeripherals, Peripherals,
-};
-use usb_host::Driver;
-
-static HANDLERS: HandlerArray = HandlerArray::new();
-
-static mut LED: usize = 0;
-
-#[entry]
-fn main() -> ! {
- let mut peripherals = Peripherals::take().expect("taking peripherals");
- let mut core = CorePeripherals::take().expect("taking core peripherals");
-
- let mut clocks = GenericClockController::with_internal_32kosc(
- peripherals.GCLK,
- &mut peripherals.PM,
- &mut peripherals.SYSCTRL,
- &mut peripherals.NVMCTRL,
- );
-
- let mut pins = hal::Pins::new(peripherals.PORT);
-
- let uart = hal::uart(
- &mut clocks,
- 115_200.hz(),
- peripherals.SERCOM0,
- &mut core.NVIC,
- &mut peripherals.PM,
- pins.d3,
- pins.d4,
- &mut pins.port,
- );
-
- let mut red_led = pins.d13.into_open_drain_output(&mut pins.port);
- red_led.set_low().expect("turning off red LED");
- unsafe { LED = core::mem::transmute(&red_led) }
-
- // We do the transmute because, while all the underlying data is
- // static, we're unable to get a referecence to the UART or LED
- // until run-time. Another option would be to use Option in the
- // SerialLogger definition, but that requires a check every time
- // they might be used.
- let uart_wrapped = logger::WriteWrapper::new(uart);
- let logger = logger::SerialLogger::new(uart_wrapped, red_led);
-
- // Wow, would I love to not be annotating this type.
- let logger_ref: &'static logger::SerialLogger<
- sercom::UART0<sercom::Sercom0Pad3<Pa7<PfD>>, sercom::Sercom0Pad2<Pa6<PfD>>, (), ()>,
- Pa10<Output<OpenDrain>>,
- > = unsafe { core::mem::transmute(&logger) };
- unsafe { log::set_logger_racy(logger_ref).expect("couldn't set logger") };
- log::set_max_level(LevelFilter::Info);
-
- info!("setting up timer");
- let mut rtc_handler = rtc::setup(peripherals.RTC, &mut clocks);
-
- info!("setting up usb host");
- let (mut usb_host, mut usb_handler) = SAMDHost::new(
- peripherals.USB,
- pins.usb_sof,
- pins.usb_dm,
- pins.usb_dp,
- Some(pins.usb_host_enable),
- &mut pins.port,
- &mut clocks,
- &mut peripherals.PM,
- &rtc::millis,
- );
-
- let mut bootkbd = BootKeyboard::new();
- let mut drivers: [&mut dyn Driver; 1] = [&mut bootkbd];
-
- info!("setting up handlers");
- HANDLERS.with_overrides(|hs| {
- hs.register(0, &mut rtc_handler);
- core.NVIC.enable(Interrupt::RTC);
-
- hs.register(1, &mut usb_handler);
- unsafe { core.NVIC.set_priority(Interrupt::USB, 0) };
- core.NVIC.enable(Interrupt::USB);
-
- info!("Boot up complete.");
-
- loop {
- usb_host.task(&mut drivers[..]);
- wfi();
- }
- });
- unreachable!();
-}
-
-#[panic_handler]
-fn panic_handler(pi: &core::panic::PanicInfo) -> ! {
- let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
- red_led.set_high().ok();
-
- logln_now!("~~~ PANIC ~~~");
- logln_now!("{}", pi);
- logln_now!("flushing log");
- loop {
- log::logger().flush();
- wfi()
- }
-}
-
-#[exception]
-fn HardFault(ef: &ExceptionFrame) -> ! {
- let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
- red_led.set_high().ok();
-
- log::logger().flush();
- logln_now!("!!! Hard Fault - ef: {:?} !!!", ef);
- logln_now!("flushing log");
- loop {
- log::logger().flush();
- wfi()
- }
-}
-
-#[exception]
-fn DefaultHandler(interrupt: i16) {
- let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
- red_led.set_high().ok();
-
- debug!("*** Default Handler: {} ***", interrupt);
-}
-
-#[exception]
-fn NonMaskableInt() {
- let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
- red_led.set_high().ok();
-
- debug!("+++ NonMaskableInt +++");
-}
-
-#[exception]
-fn SVCall() {
- let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
- red_led.set_high().ok();
-
- debug!("+++ SVCall +++");
-}
-
-#[exception]
-fn PendSV() {
- let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
- red_led.set_high().ok();
-
- debug!("+++ PendSV +++");
-}
-
-#[exception]
-fn SysTick() {
- let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
- red_led.set_high().ok();
-
- debug!("+++ SysTick +++");
-}
-
-#[interrupt]
-fn RTC() {
- HANDLERS.call(0);
-}
-
-#[interrupt]
-fn USB() {
- HANDLERS.call(1);
-}
diff --git a/examples/simple/rtc.rs b/examples/simple/rtc.rs
deleted file mode 100644
index 79e450a..0000000
--- a/examples/simple/rtc.rs
+++ /dev/null
@@ -1,74 +0,0 @@
-use core::sync::atomic::{AtomicUsize, Ordering};
-use log;
-use trinket_m0::{clock::GenericClockController, RTC};
-
-struct Clock(AtomicUsize);
-impl Clock {
- const fn new() -> Self {
- Self(AtomicUsize::new(0))
- }
-
- fn set(&self, millis: usize) {
- self.0.store(millis, Ordering::SeqCst)
- }
-
- // Slightly less than 1ms, due to using a 32,768Hz clock, we can't
- // hit exactly 1ms, so we shoot for a bit under.
- fn millis(&self) -> usize {
- self.0.load(Ordering::SeqCst)
- }
-}
-
-static CLOCK: Clock = Clock::new();
-
-// Set to run every ~500µs.
-static COUNTER: u32 = 16; // 32 ticks requires 1024 cycles at 32,768Hz for 1 second.
-
-pub fn setup(mut rtc: RTC, clocks: &mut GenericClockController) -> impl FnMut() {
- let rtc_clock = &clocks.gclk1();
- clocks.rtc(&rtc_clock);
-
- rtc.mode0().ctrl.write(|w| w.swrst().set_bit());
- while rtc.mode0().status.read().syncbusy().bit_is_set() {}
-
- rtc.mode0().ctrl.write(|w| {
- w.mode().count32();
-
- // Neither the prescaler nor matchlr values seem to work. Not
- // sure why.
- //w.prescaler().div1024();
- w.matchclr().set_bit() // Reset on match for periodic
- });
-
- rtc.mode0().comp[0].write(|w| unsafe { w.bits(COUNTER) });
- rtc.mode0().intflag.write(|w| w.cmp0().set_bit());
- rtc.mode0().intenset.write(|w| w.cmp0().set_bit());
-
- // Enable the RTC and wait for sync.
- rtc.mode0().ctrl.write(|w| w.enable().set_bit());
- while rtc.mode0().status.read().syncbusy().bit_is_set() {}
-
- move || handler(&mut rtc)
-}
-
-pub fn millis() -> usize {
- CLOCK.millis()
-}
-
-fn handler(rtc: &mut RTC) {
- // FIXME: matchclr doesn't seem to work to reset the counter?
- rtc.mode0().count.write(|w| unsafe { w.bits(0) });
- rtc.mode0().intflag.write(|w| w.cmp0().set_bit());
-
- static mut TICKS: usize = 0;
- static mut ADD: bool = false;
- unsafe {
- if ADD {
- TICKS += 1;
- CLOCK.set(TICKS);
- }
- ADD = !ADD;
-
- log::logger().flush();
- }
-}