From 101a0859612cbf40364d198eea60b9ae934f721a Mon Sep 17 00:00:00 2001 From: Brian Cully Date: Wed, 14 Aug 2019 09:17:17 -0400 Subject: Add TODO list for ble. --- ble/TODO.org | 46 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 ble/TODO.org (limited to 'ble/TODO.org') diff --git a/ble/TODO.org b/ble/TODO.org new file mode 100644 index 0000000..69de785 --- /dev/null +++ b/ble/TODO.org @@ -0,0 +1,46 @@ +* Track down the I²C lag. + +The "- 0" markers are the number of milliseconds a log output to +serial took, so also convienently show when the log did its output to +serial. It doesn't seem like logging is the problem here. + +Each write -> stopped is sub-milliscend, but write -> write has a +millisecond lag. + +But the weirdest thing is the "i2c data" bit, which is where the main +loop has pulled the I²C data from its ring bufffer. From previous logs +(not shown) the time at the end of pulling from the ring buffer is the +same at the start. So somewhere there's at least 1ms being lost +between the stopped event and the start of the main loop. + +This may need to wait for a logic analyzer to get more accurate +timings. + +In the mean-time we can add number-of-calls counters and time-inside +logs from interrupt handlers that we can dump every second or so to +try and figure out where the clock cycles are going. + +#+BEGIN +[0] TRACE ble::rtc -- setting up clock +[0] TRACE ble::rtc -- set prescaler! +[0] INFO ble::uarte1 -- setting up dma: p: 20000008, maxcnt: 128 +[0] INFO ble::uarte1 -- rxstarted + - 0[2] INFO ble -- - 0Bootstrap complete. + - 0 + +[11121] TRACE ble::i2c -- i²c write +[11121] TRACE ble::i2c -- write done +[11121] TRACE ble::i2c -- i²c stopped: 2 + - 0[11122] TRACE ble::i2c -- i²c write +[11122] TRACE ble::i2c -- write done +[11122] TRACE ble::i2c -- i²c stopped: 8 + - 0[11125] INFO ble -- i2c data + - 0[11138] TRACE ble::i2c -- i²c write +[11138] TRACE ble::i2c -- write done +[11138] TRACE ble::i2c -- i²c stopped: 2 + - 0[11139] TRACE ble::i2c -- i²c write +[11139] TRACE ble::i2c -- write done +[11139] TRACE ble::i2c -- i²c stopped: 8 + - 0[11141] INFO ble -- - 0i2c data + - 0 +#+END -- cgit v1.2.3