aboutsummaryrefslogtreecommitdiffstats
path: root/net/server_epoll.lua
Commit message (Collapse)AuthorAgeFilesLines
* net.server_epoll: Prevent removed timers from being readdedKim Alvefur2021-08-311-2/+12
| | | | | | | | | In a case like this the timer would not be readded: addtimer(1, function(t, id) stop(id) return 1 end);
* Merge 0.11->trunkKim Alvefur2021-08-311-29/+29
|\
| * net.server_epoll: Fix to preserve ids of readded timersKim Alvefur2021-08-311-2/+2
| | | | | | | | | | | | | | Likely affected rescheduling but have no reports of this. After readding a timer, it would have been issued a new id. Rescheduling would use the previous id, thus not working.
| * net.server_epoll: Fix off-by-one in 2c559953ad41Kim Alvefur2021-01-101-1/+1
| | | | | | | | Thanks tmolitor
* | net.server_epoll: Split, attempt to clarify dirty noise messageKim Alvefur2021-08-161-1/+2
| | | | | | | | | | | | Only relevant because a "dirty" connection (with incoming data in LuaSocket's buffer) does not count as "readable" according to epoll, so special care needs to be taken to keep on processing it.
* | net.server: Add a predrain callaback just before writesKim Alvefur2021-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | Allows sneaking in things in the write buffer just before it's sent to the network stack. For example ack requests, compression flushes or other things that make sense to send after stanzas or other things. This ensures any additional trailing data sent is included in the same write, and possibly the same TCP packet. Other methods used such as timers or nextTick might not have the same effect as it depends on scheduling.
* | net.server_epoll: Improve efficiency of opportunistic writesKim Alvefur2021-08-141-1/+3
| | | | | | | | | | | | | | | | | | Should prevent further opportunistic write attempts after the kernel buffers are full and stops accepting writes. When combined with `keep_buffers = false` it should stop it from repeatedly recreating the buffer table and concatenating it back into a string when there's a lot to write.
* | net.server_epoll: Fix traceback-causing typoKim Alvefur2021-07-181-1/+1
| | | | | | | | | | | | | | Caused "attempt to index a string value (local 'data')", but only if keep_buffers is set to false, which is not the default. Introduced in 917eca7be82b
* | net.server_epoll: Ensure timeouts match epoll flagsKim Alvefur2021-07-171-0/+6
| | | | | | | | | | Read and write timeouts should usually match whether we want to read or write.
* | net.server_epoll: Skip reset of read timeout when not readingKim Alvefur2021-07-171-1/+2
| | | | | | | | Should avoid rare but needless timer interactions
* | net.server_epoll: Reduce timer churn during TLS handshakeKim Alvefur2021-07-171-1/+1
| | | | | | | | | | Instead of removing and readding the timer, keep it and adjust it instead. Should reduce garbage production a bit.
* | net.server_epoll: Use only fatal "write" timeout during TLS negotiationKim Alvefur2021-07-161-3/+3
| | | | | | | | | | | | | | Only real difference between the read and write timeouts is that the former has a callback that allows the higher levels to keep the connection alive, while hitting the later is immediately fatal. We want the later behavior for TLS negotiation.
* | net.server_epoll: Optimize concatenation of exactly 2 buffer chunksKim Alvefur2021-07-161-1/+3
| | | | | | | | | | | | Saves a function call. I forget if I measured this kind of thing but IIRC infix concatenation is faster than a function call up to some number of items, but let's stop at 2 here.
* | net.server_epoll: Avoid allocating a buffer table for single writesKim Alvefur2021-07-161-11/+20
| | | | | | | | | | | | | | writebuffer is now string | { string } Saves the allocation of a buffer table until the second write, which could be rare, especially with opportunistic writes.
* | net.server_epoll: Optionally let go of buffersKim Alvefur2021-07-161-5/+17
| | | | | | | | | | Reusing an already existing buffer table would reduce garbage, but keeping it while idle is a waste.
* | net.server_epoll: Propagate returns from opportunistic writesKim Alvefur2021-07-161-3/+4
| | | | | | | | | | So that if a write ends up writing directly to the socket, it gets the actual return value
* | net.server_epoll: Set minimum wait time to 1ms, matching epollKim Alvefur2021-07-151-1/+1
| | | | | | | | | | | | | | | | | | | | A timeout value less than 0.001 gets turned into zero on the C side, so epoll_wait() returns instantly and essentially busy-loops up to 1ms, e.g. when a timer event ends up scheduled (0, 0.001)ms into the future. Unsure if this has much effect in practice, but it may waste a small amount of CPU time. How much would depend on how often this ends up happening and how fast the CPU gets trough main loop iterations.
* | net.server_epoll: Add setting for disabling the Nagle algorithmKim Alvefur2021-07-141-0/+6
| | | | | | | | Nagle increases latency and is the bane of all networking!
* | net.server_epoll: Support setting keepalive idle timeKim Alvefur2021-07-141-0/+3
| | | | | | | | | | | | | | Activated by setting config.tcp_keepalive to a number, in seconds. Defaults to 2h. Depends on LuaSocket support for this option.
* | net.server_epoll: Add way to enable TCP keeplives on all connectionsKim Alvefur2021-07-141-1/+6
| | | | | | | | | | | | In case one wishes to enable this for all connections, not just c2s (not Direct TLS ones, because LuaSec) and s2s. Unclear what use these are, since they kick in after 2 hours of idle time.
* | net.server_epoll: Add an (empty) method for setting socket optionsKim Alvefur2021-07-141-0/+6
| |
* | net.server_epoll: Log failures to set socket optionsKim Alvefur2021-07-141-2/+8
| | | | | | | | | | | | | | | | | | Good to know if it fails, especially since the return value doesn't seem to be checked anywhere. Since LuaSec-wrapped sockets don't expose the setoption method, this will likely show when mod_c2s tries to enable keepalives on direct tls connections.
* | net.server_epoll: Call onconnect immediately after TLS handshake completionKim Alvefur2021-07-131-1/+2
| | | | | | | | | | | | Skips a roundtrip through the main loop in case client-first data is available already, if not then :onreadable() will set the appropriate timeout.
* | net.server_epoll: Refactor immediate TLS handshake startKim Alvefur2021-07-131-6/+5
| |
* | net.server_epoll: Keep socket registered in epoll trough TLS wrappingKim Alvefur2021-07-131-2/+1
| | | | | | | | | | There's the theory that the socket isn't the same before/after wrap(), but since epoll operates on FD numbers this shouldn't matter.
* | net.server_epoll: Use TLS handshake timeout after initiating handshakeKim Alvefur2021-07-131-1/+3
| | | | | | | | The :init() method sets a different timeout than the TLS related methods.
* | net.server_epoll: Start TLS handshake immediately on newly accepted connectionsKim Alvefur2021-07-131-0/+1
| | | | | | | | | | | | Since TLS is a client-first protocol there is a chance that the ClientHello message is available already. TLS Fast Open and/or the TCP_DEFER_ACCEPT socket option would increase that chance.
* | net.server_epoll: Factor out TLS initialization into a methodKim Alvefur2021-07-131-45/+51
| | | | | | | | | | | | | | | | | | | | | | So there's :startls(), :inittls() and :tlshandshake() :starttls() prepares for plain -> TLS upgrade and ensures that the (unencrypted) write buffer is drained before proceeding. :inittls() wraps the connection and does things like SNI, DANE etc. :tlshandshake() steps the TLS negotiation forward until it completes
* | net.server_epoll: Fix typoKim Alvefur2021-07-131-1/+1
| |
* | net.server_epoll: Prevent stack overflow of opportunistic writesKim Alvefur2021-07-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | net.http.files serving a big enough file on a fast enough connection with opportunistic_writes enabled could trigger a stack overflow through repeatedly serving more data that immediately gets sent, draining the buffer and triggering more data to be sent. This also blocked the server on a single task until completion or an error. This change prevents nested opportunistic writes, which should prevent the stack overflow, at the cost of reduced download speed, but this is unlikely to be noticeable outside of Gbit networks. Speed at the cost of blocking other processing is not worth it, especially with the risk of stack overflow.
* | net.server_epoll: Immediately attempt to read from newly accepted connectionsKim Alvefur2021-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This may speed up client-first protocols (e.g. XMPP, HTTP and TLS) when the first client data already arrived by the time we accept() it. If LuaSocket supported TCP_DEFER_ACCEPT we could use that to further increase the chance that there's already data to handle. In case no data has arrived, no harm should be done, :onreadable would simply set the read timeout and we'll get back to it once there is something to handle.
* | net.server_epoll: Separate handling of new incoming and outgoing connectionsKim Alvefur2021-07-081-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | The :init method is more suited for new outgoing connections, which is why it uses the connect_timeout setting. Depending on whether a newly accepted connection is to a Direct TLS port or not, it should be handled differently, and was already. The :starttls method sets up timeouts on its own, so the one set in :init was not needed. Newly accepted plain TCP connections don't need a write timeout set, a read timeout is enough.
* | net.server_epoll: Ensure timeout after closingKim Alvefur2020-10-311-0/+1
| | | | | | | | | | | | This should make sure that if there's data left to be written when closing a connection, there's also a timeout so that it doesn't wait forever.
* | net.server_epoll: Add missing method for changing TLS contextKim Alvefur2021-06-101-0/+4
| | | | | | | | | | Supported by the other net.server implementations already, but not used anywhere in Prosody.
* | net.server_epoll: Fix reporting of socket connect timeoutKim Alvefur2021-06-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the underlying TCP connection times out before the write timeout kicks in, end up here with err="timeout", which the following code treats as a minor issue. Then, due to epoll apparently returning the EPOLLOUT (writable) event too, we go on and try to write to the socket (commonly stream headers). This fails because the socket is closed, which becomes the error returned up the stack to the rest of Prosody. This also trips the 'onconnect' signal, which has effects on various things, such as the net.connect state machine. Probably undesirable effects. With this, we instead return "connection timeout", like server_event, and destroy the connection handle properly. And then nothing else happens because the connection has been destroyed.
* | net.server_epoll: Remove unnecessary luacheck annotationsKim Alvefur2021-04-011-3/+3
| | | | | | | | | | Not sure why these were here to begin with, since it does use the 'self' argument and did so since they were added.
* | net.server_epoll: Support for passing DANE TLSA data to LuaSec (0.8 needed)Kim Alvefur2019-09-291-0/+14
| |
* | Merge 0.11->trunkKim Alvefur2021-01-081-2/+18
|\|
| * net.server_epoll: Ensure timers can't run more than once per tickKim Alvefur2021-01-081-2/+18
| | | | | | | | | | | | | | | | This makes sure that a timer that returns 0 (or less) does not prevent runtimers() from completing, as well as making sure a timer added with zero timeout from within a timer does not run until the next tick. Thanks tmolitor
| * net.server: Backport client parts of SNI support from trunk (#409)Kim Alvefur2020-08-171-5/+15
| | | | | | | | | | | | | | | | | | | | Partial backports of the following commits from trunk: 6c804b6b2ca2 net.http: Pass server name along for SNI (fixes #1408) 75d2874502c3 net.server_select: SNI support (#409) 9a905888b96c net.server_event: Add SNI support (#409) adc0672b700e net.server_epoll: Add support for SNI (#409) d4390c427a66 net.server: Handle server name (SNI) as extra argument
| * net.server_epoll: Fix indentationKim Alvefur2020-03-111-3/+3
| | | | | | | | | | | | Some lines seem to have gotten the wrong indentation, possibly caused by Meld which often ignores lines with only whitespace changes and leaves their previous indentation.
| * net.server_epoll: Backport timer optimization 6c2370f17027 from trunk (see ↵Kim Alvefur2019-07-081-48/+29
| | | | | | | | | | | | | | #1388) The previous timer handling did not scale well and led to high CPU usage with many connections (each with at least an read timeout).
* | net.server_epoll: Increase log level for error in callbackKim Alvefur2020-12-161-1/+1
| | | | | | | | It's an error, it should be logged at error level.
* | net.server_epoll: Log debug message when a connection errors on readKim Alvefur2020-07-251-0/+5
| | | | | | | | | | | | It's confusingly quiet otherwise, even with maximum verboseness. Thanks perflyst
* | net.server_epoll: Add setting for turning off callback protectionsKim Alvefur2020-06-301-0/+6
| | | | | | | | | | Might improve (CPU) performance at the risk of triggering top level errors.
* | net.server_epoll: Allow setting a custom error handler for listenerKim Alvefur2020-06-301-1/+2
| | | | | | | | This lets plugins handle errors in some custom way, should they wish to.
* | net.server_epoll: ... and include a tracebackKim Alvefur2020-06-301-1/+1
| |
* | net.server_epoll: Report errors in timersKim Alvefur2020-06-301-0/+2
| |
* | net.server_epoll: Expose way to turn monotonic time into wall clock timeKim Alvefur2020-06-301-0/+3
| |
* | net.server_epoll: Optimize away table allocation for timer objectsKim Alvefur2020-06-291-15/+21
| |