aboutsummaryrefslogtreecommitdiffstats
path: root/app/src/usb
diff options
context:
space:
mode:
Diffstat (limited to 'app/src/usb')
-rw-r--r--app/src/usb/pipe.rs503
-rw-r--r--app/src/usb/pipe/addr.rs87
-rw-r--r--app/src/usb/pipe/ctrl_pipe.rs177
-rw-r--r--app/src/usb/pipe/ext_reg.rs156
-rw-r--r--app/src/usb/pipe/pck_size.rs360
-rw-r--r--app/src/usb/pipe/status_bk.rs170
-rw-r--r--app/src/usb/pipe/status_pipe.rs407
-rw-r--r--app/src/usb/usbproto.rs331
8 files changed, 2191 insertions, 0 deletions
diff --git a/app/src/usb/pipe.rs b/app/src/usb/pipe.rs
new file mode 100644
index 0000000..12ca4cb
--- /dev/null
+++ b/app/src/usb/pipe.rs
@@ -0,0 +1,503 @@
+pub mod addr;
+pub mod ctrl_pipe;
+pub mod ext_reg;
+pub mod pck_size;
+pub mod status_bk;
+pub mod status_pipe;
+
+use addr::Addr;
+use ctrl_pipe::CtrlPipe;
+use ext_reg::ExtReg;
+use pck_size::PckSize;
+use status_bk::StatusBk;
+use status_pipe::StatusPipe;
+
+use crate::logln_now;
+use crate::rtc;
+
+use core::convert::TryInto;
+
+// FIXME: this stuff is needed for PipeRegs, and while tied to samd,
+// it shouldn't be tied to trinket_m0. Will need to figure out a
+// better layout for this.
+use trinket_m0::usb::{
+ self,
+ host::{BINTERVAL, PCFG, PINTFLAG, PSTATUS, PSTATUSCLR, PSTATUSSET},
+};
+
+// TODO: verify this timeout against §9.2.6.1 of USB 2.0 spec.
+const USB_TIMEOUT: usize = 5 * 1024; // 5 Seconds
+
+// samd21 only supports 8 pipes.
+const MAX_PIPES: usize = 8;
+
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub(crate) enum PipeErr {
+ InvalidPipe,
+ InvalidToken,
+ Stall,
+ TransferFail,
+ Flow,
+ HWTimeout,
+ DataToggle,
+ SWTimeout,
+ Other,
+}
+pub(crate) struct PipeTable {
+ tbl: [PipeDesc; MAX_PIPES],
+}
+
+impl PipeTable {
+ pub(crate) fn new() -> Self {
+ Self {
+ tbl: [PipeDesc::new(); MAX_PIPES],
+ }
+ }
+
+ pub(crate) fn pipe_for<'a, 'b>(
+ &'a mut self,
+ host: &'b mut usb::HOST,
+ addr: u8,
+ ep: u8,
+ ) -> Pipe<'a, 'b> {
+ // Just use two pipes for now. 0 is always for control
+ // endpoints, 1 for everything else.
+ //
+ // TODO: cache in-use pipes and return them without init if
+ // possible.
+ let i = if ep == 0 { 0 } else { 1 };
+
+ let pregs = PipeRegs::from(host, i);
+ let pdesc = &mut self.tbl[i];
+
+ logln_now!("setting paddr of pipe {} to {}:{}", i, addr, ep);
+ logln_now!("cpipe0: {:x}", pdesc.bank0.ctrl_pipe.read().bits());
+ pdesc.bank0.ctrl_pipe.write(|w| {
+ w.pdaddr().set_addr(addr);
+ w.pepnum().set_epnum(ep)
+ });
+ logln_now!("cpipe1: {:x}", pdesc.bank0.ctrl_pipe.read().bits());
+ Pipe {
+ num: i,
+ regs: pregs,
+ desc: pdesc,
+ }
+ }
+}
+
+// TODO: hide regs/desc fields. Needed right now for init_pipe0.
+pub(crate) struct Pipe<'a, 'b> {
+ num: usize,
+ pub(crate) regs: PipeRegs<'b>,
+ pub(crate) desc: &'a mut PipeDesc,
+}
+impl Pipe<'_, '_> {
+ pub(crate) fn send(
+ &mut self,
+ token: USBToken,
+ buf: &DataBuf,
+ nak_limit: usize,
+ ) -> Result<(), PipeErr> {
+ // Data needs to be word aligned.
+ assert!((buf.ptr as u32) & 0x3 == 0);
+ // byte_count section of register is 14 bits.
+ assert!(buf.len < 16_384);
+
+ logln_now!("p{}: sending {:?}", self.num, buf);
+
+ // Equiv to UHD_Pipe_Write(epAddr: 0, sizeof(setup_packet), &setup_packet)
+ self.desc
+ .bank0
+ .addr
+ .write(|w| unsafe { w.addr().bits(buf.ptr as u32) });
+ // configure packet size PCKSIZE.SIZE
+ self.desc.bank0.pcksize.write(|w| {
+ // FIXME: write raw to pcksize, because byte_count offset
+ // may be off? Doc table shows 6 bits, but text says 14,
+ // and arduino shows 14.
+ unsafe { w.bits(buf.len as u32) }
+ //unsafe { w.byte_count().bits(buf.len as u8) };
+ //unsafe { w.multi_packet_size().bits(0) }
+ });
+
+ self.dispatch_retries(token, nak_limit)
+ }
+
+ pub(crate) fn in_transfer(&mut self, buf: &DataBuf, nak_limit: usize) -> Result<(), PipeErr> {
+ // Data needs to be word aligned.
+ assert!((buf.ptr as u32) & 0x3 == 0);
+ // byte_count section of register is 14 bits.
+ assert!(buf.len < 16_384);
+
+ logln_now!("p{}: Should IN for {}b.", self.num, buf.len);
+ // TODO: should just pass pipe and pregs in, probably. TODO:
+ // merge with stuff in `send_to_pipe` that also does this.
+ self.desc
+ .bank0
+ .addr
+ .write(|w| unsafe { w.addr().bits(buf.ptr as u32) });
+ self.desc.bank0.pcksize.write(|w| {
+ // FIXME: see note in `send`.
+ unsafe { w.bits(buf.len as u32) }
+ //unsafe { w.byte_count().bits(buf.len as u8) };
+ //unsafe { w.multi_packet_size().bits(0) }
+ });
+
+ // Possibly set PSTATUS.DTGL? Not sure how this works
+ // yet. Arduino would set it here if dispatchPkt returned USB_ERROR_DATATOGGLE
+ //pregs.statusset.write(|w| w.dtgl().set_bit());
+ //pregs.statusclr.write(|w| unsafe {
+ // No function for this. FIXME: need to patch the SVD for
+ // PSTATUSCLR.DTGL at bit0
+ // w.bits(1)
+ //});
+
+ self.dispatch_retries(USBToken::In, nak_limit)
+ }
+
+ pub(crate) fn dispatch_retries(
+ &mut self,
+ token: USBToken,
+ retries: usize,
+ ) -> Result<(), PipeErr> {
+ assert!(retries > 0);
+
+ logln_now!("initial regs");
+ self.log_regs();
+
+ let until = rtc::millis() + USB_TIMEOUT;
+ let mut last_result: Result<(), PipeErr> = Err(PipeErr::SWTimeout);
+ let mut naks = 0;
+ while naks <= retries {
+ logln_now!("p{}: dispatch {:?} retry {}", self.num, token, naks);
+
+ self.dispatch_packet(token);
+ last_result = self.dispatch_result(token, until);
+ match last_result {
+ Ok(_) => return Ok(()),
+ // FIXME: handle datatoggle
+ Err(PipeErr::DataToggle) => {
+ if self.regs.status.read().dtgl().bit_is_set() {
+ self.regs.statusset.write(|w| w.dtgl().set_bit());
+ } else {
+ self.regs.statusclr.write(|w| unsafe {
+ // No function for this. FIXME: need to patch the SVD for PSTATUSCLR.DTGL at bit0
+ w.bits(1)
+ });
+ }
+ }
+ Err(PipeErr::SWTimeout) => break,
+ Err(PipeErr::Stall) => break,
+ Err(_) => naks += 1,
+ }
+ }
+
+ last_result
+ }
+
+ fn log_regs(&self) {
+ // Pipe regs
+ let cfg = self.regs.cfg.read().bits();
+ let bin = self.regs.binterval.read().bits();
+ let sts = self.regs.status.read().bits();
+ let ifl = self.regs.intflag.read().bits();
+ logln_now!(
+ "p{}: cfg: {:x}, bin: {:x}, sts: {:x}, ifl: {:x}",
+ self.num,
+ cfg,
+ bin,
+ sts,
+ ifl
+ );
+
+ // Pipe RAM regs
+ let adr = self.desc.bank0.addr.read().bits();
+ let pks = self.desc.bank0.pcksize.read().bits();
+ let ext = self.desc.bank0.extreg.read().bits();
+ let sbk = self.desc.bank0.status_bk.read().bits();
+ let hcp = self.desc.bank0.ctrl_pipe.read().bits();
+ let spi = self.desc.bank0.status_pipe.read().bits();
+ logln_now!(
+ "p{}: adr: {:x}, pks: {:x}, ext: {:x}, sbk: {:x}, hcp: {:x}, spi: {:x}",
+ self.num,
+ adr,
+ pks,
+ ext,
+ sbk,
+ hcp,
+ spi
+ );
+ }
+
+ fn dispatch_packet(&mut self, token: USBToken) {
+ self.regs
+ .cfg
+ .modify(|_, w| unsafe { w.ptoken().bits(token as u8) });
+ match token {
+ USBToken::Setup => {
+ self.regs.intflag.write(|w| w.txstp().set_bit());
+ self.regs.statusset.write(|w| w.bk0rdy().set_bit());
+ }
+ USBToken::In => self.regs.statusclr.write(|w| w.bk0rdy().set_bit()),
+ USBToken::Out => {
+ self.regs.intflag.write(|w| w.trcpt0().set_bit());
+ self.regs.statusset.write(|w| w.bk0rdy().set_bit());
+ }
+ _ => {}
+ }
+ self.regs.statusclr.write(|w| w.pfreeze().set_bit());
+ }
+
+ fn dispatch_result(&mut self, token: USBToken, until: usize) -> Result<(), PipeErr> {
+ while rtc::millis() <= until {
+ if self.is_transfer_complete(token)? {
+ return Ok(());
+ } else if self.regs.intflag.read().stall().bit_is_set() {
+ logln_now!("stall");
+ self.log_regs();
+ self.regs.intflag.write(|w| w.stall().set_bit());
+ return Err(PipeErr::Stall);
+ } else if self.regs.intflag.read().trfail().bit_is_set() {
+ logln_now!("trfail");
+ self.log_regs();
+ self.regs.intflag.write(|w| w.trfail().set_bit());
+ return Err(PipeErr::TransferFail);
+ } else if self.desc.bank0.status_bk.read().errorflow().bit_is_set() {
+ logln_now!("errorflow");
+ self.log_regs();
+ self.desc
+ .bank0
+ .status_bk
+ .write(|w| w.errorflow().clear_bit());
+ return Err(PipeErr::Flow);
+ } else if self.desc.bank0.status_pipe.read().touter().bit_is_set() {
+ logln_now!("touter");
+ self.log_regs();
+ self.desc
+ .bank0
+ .status_pipe
+ .write(|w| w.touter().clear_bit());
+ return Err(PipeErr::HWTimeout);
+ } else if self.desc.bank0.status_pipe.read().dtgler().bit_is_set() {
+ logln_now!("dtgler");
+ self.log_regs();
+ self.desc
+ .bank0
+ .status_pipe
+ .write(|w| w.dtgler().clear_bit());
+ return Err(PipeErr::DataToggle);
+ }
+ }
+ logln_now!("swtimeout");
+ self.log_regs();
+ Err(PipeErr::SWTimeout)
+ }
+
+ fn is_transfer_complete(&mut self, token: USBToken) -> Result<bool, PipeErr> {
+ match token {
+ USBToken::Setup => {
+ if self.regs.intflag.read().txstp().bit_is_set() {
+ self.regs.intflag.write(|w| w.txstp().set_bit());
+ self.regs.statusset.write(|w| w.pfreeze().set_bit());
+ Ok(true)
+ } else {
+ Ok(false)
+ }
+ }
+ USBToken::In => {
+ if self.regs.intflag.read().trcpt0().bit_is_set() {
+ self.regs.intflag.write(|w| w.trcpt0().set_bit());
+ self.regs.statusset.write(|w| w.pfreeze().set_bit());
+ Ok(true)
+ } else {
+ Ok(false)
+ }
+ }
+ USBToken::Out => {
+ if self.regs.intflag.read().trcpt0().bit_is_set() {
+ self.regs.intflag.write(|w| w.trcpt0().set_bit());
+ self.regs.statusset.write(|w| w.pfreeze().set_bit());
+ Ok(true)
+ } else {
+ Ok(false)
+ }
+ }
+ _ => Err(PipeErr::InvalidToken),
+ }
+ }
+}
+
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub(crate) enum USBToken {
+ Setup = 0,
+ In = 1,
+ Out = 2,
+ Reserved = 3,
+}
+
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub(crate) enum USBPipeType {
+ Disabled = 0x0,
+ Control = 0x1,
+ ISO = 0x2,
+ Bulk = 0x3,
+ Interrupt = 0x4,
+ Extended = 0x5,
+ _Reserved0 = 0x06,
+ _Reserved1 = 0x07,
+}
+
+pub(crate) struct DataBuf<'a> {
+ pub(crate) ptr: *const u8,
+ pub(crate) len: usize,
+ _marker: core::marker::PhantomData<&'a ()>,
+}
+impl DataBuf<'_> {}
+
+impl core::fmt::Debug for DataBuf<'_> {
+ fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
+ write!(f, "DataBuf {{ len: {}, ptr: [", self.len)?;
+ for i in 0..self.len {
+ write!(f, " {:x}", unsafe {
+ *self.ptr.offset(i.try_into().unwrap())
+ })?;
+ }
+ write!(f, " ] }}")
+ }
+}
+
+impl<'a, T> From<&'a T> for DataBuf<'a> {
+ fn from(v: &'a T) -> Self {
+ Self {
+ ptr: v as *const T as *const u8,
+ len: core::mem::size_of::<T>(),
+ _marker: core::marker::PhantomData,
+ }
+ }
+}
+
+pub(crate) struct PipeRegs<'a> {
+ pub(crate) cfg: &'a mut PCFG,
+ pub(crate) binterval: &'a mut BINTERVAL,
+ pub(crate) statusclr: &'a mut PSTATUSCLR,
+ pub(crate) statusset: &'a mut PSTATUSSET,
+ pub(crate) status: &'a mut PSTATUS,
+ pub(crate) intflag: &'a mut PINTFLAG,
+}
+impl<'a> PipeRegs<'a> {
+ pub(crate) fn from(host: &'a mut usb::HOST, i: usize) -> PipeRegs {
+ assert!(i < MAX_PIPES);
+ match i {
+ 0 => Self {
+ cfg: &mut host.pcfg0,
+ binterval: &mut host.binterval0,
+ statusclr: &mut host.pstatusclr0,
+ statusset: &mut host.pstatusset0,
+ status: &mut host.pstatus0,
+ intflag: &mut host.pintflag0,
+ },
+ 1 => Self {
+ cfg: &mut host.pcfg1,
+ binterval: &mut host.binterval1,
+ statusclr: &mut host.pstatusclr1,
+ statusset: &mut host.pstatusset1,
+ status: &mut host.pstatus1,
+ intflag: &mut host.pintflag1,
+ },
+ 2 => Self {
+ cfg: &mut host.pcfg2,
+ binterval: &mut host.binterval2,
+ statusclr: &mut host.pstatusclr2,
+ statusset: &mut host.pstatusset2,
+ status: &mut host.pstatus2,
+ intflag: &mut host.pintflag2,
+ },
+ 3 => Self {
+ cfg: &mut host.pcfg3,
+ binterval: &mut host.binterval3,
+ statusclr: &mut host.pstatusclr3,
+ statusset: &mut host.pstatusset3,
+ status: &mut host.pstatus3,
+ intflag: &mut host.pintflag3,
+ },
+ 4 => Self {
+ cfg: &mut host.pcfg4,
+ binterval: &mut host.binterval4,
+ statusclr: &mut host.pstatusclr4,
+ statusset: &mut host.pstatusset4,
+ status: &mut host.pstatus4,
+ intflag: &mut host.pintflag4,
+ },
+ 5 => Self {
+ cfg: &mut host.pcfg5,
+ binterval: &mut host.binterval5,
+ statusclr: &mut host.pstatusclr5,
+ statusset: &mut host.pstatusset5,
+ status: &mut host.pstatus5,
+ intflag: &mut host.pintflag5,
+ },
+ 6 => Self {
+ cfg: &mut host.pcfg6,
+ binterval: &mut host.binterval6,
+ statusclr: &mut host.pstatusclr6,
+ statusset: &mut host.pstatusset6,
+ status: &mut host.pstatus6,
+ intflag: &mut host.pintflag6,
+ },
+ 7 => Self {
+ cfg: &mut host.pcfg7,
+ binterval: &mut host.binterval7,
+ statusclr: &mut host.pstatusclr7,
+ statusset: &mut host.pstatusset7,
+ status: &mut host.pstatus7,
+ intflag: &mut host.pintflag7,
+ },
+ _ => unreachable!(),
+ }
+ }
+}
+
+// §32.8.7.1
+#[derive(Clone, Copy, Debug)]
+pub(crate) struct PipeDesc {
+ pub bank0: BankDesc,
+ pub bank1: BankDesc,
+}
+
+// 2 banks: 32 bytes per pipe.
+impl PipeDesc {
+ pub fn new() -> Self {
+ Self {
+ bank0: BankDesc::new(),
+ bank1: BankDesc::new(),
+ }
+ }
+}
+
+#[derive(Clone, Copy, Debug)]
+#[repr(C, packed)]
+// 16 bytes per bank.
+pub(crate) struct BankDesc {
+ pub addr: Addr,
+ pub pcksize: PckSize,
+ pub extreg: ExtReg,
+ pub status_bk: StatusBk,
+ pub ctrl_pipe: CtrlPipe,
+ pub status_pipe: StatusPipe,
+
+ _reserved: u8,
+}
+
+impl BankDesc {
+ fn new() -> Self {
+ Self {
+ addr: Addr::from(0),
+ pcksize: PckSize::from(0),
+ extreg: ExtReg::from(0),
+ status_bk: StatusBk::from(0),
+ ctrl_pipe: CtrlPipe::from(0),
+ status_pipe: StatusPipe::from(0),
+ _reserved: 0,
+ }
+ }
+}
diff --git a/app/src/usb/pipe/addr.rs b/app/src/usb/pipe/addr.rs
new file mode 100644
index 0000000..8b92177
--- /dev/null
+++ b/app/src/usb/pipe/addr.rs
@@ -0,0 +1,87 @@
+/// § 32.8.7.2
+/// Address of the Data Buffer.
+///
+/// Offset: 0x00 & 0x10
+/// Reset: 0xxxxxxxxx
+/// Property: NA
+#[derive(Clone, Copy, Debug)]
+#[repr(C)]
+pub(crate) struct Addr(u32);
+
+pub(crate) struct R {
+ bits: u32,
+}
+
+pub(crate) struct W {
+ bits: u32,
+}
+
+impl Addr {
+ pub fn read(&self) -> R {
+ R { bits: self.0 }
+ }
+
+ pub fn write<F>(&mut self, f: F)
+ where
+ F: FnOnce(&mut W) -> &mut W,
+ {
+ let mut w = W { bits: self.0 };
+ f(&mut w);
+ // Address must be 32-bit aligned.
+ assert!((w.bits & 0x3) == 0);
+ self.0 = w.bits;
+ }
+}
+
+impl From<u32> for Addr {
+ fn from(v: u32) -> Self {
+ Self(v)
+ }
+}
+
+impl R {
+ /// Value in raw bits.
+ pub fn bits(&self) -> u32 {
+ self.bits
+ }
+
+ pub fn addr(&self) -> AddrR {
+ AddrR(self.bits)
+ }
+}
+
+/// Data Pointer Address Value
+///
+/// These bits define the data pointer address as an absolute double
+/// word address in RAM. The two least significant bits must be zero
+/// to ensure the descriptor is 32-bit aligned.
+pub(crate) struct AddrR(u32);
+impl AddrR {
+ pub fn bits(&self) -> u32 {
+ self.0
+ }
+}
+
+impl W {
+ /// Write raw bits.
+ pub unsafe fn bits(&mut self, v: u32) -> &mut Self {
+ self.bits = v;
+ self
+ }
+
+ pub fn addr(&mut self) -> AddrW {
+ AddrW { w: self }
+ }
+}
+
+pub(crate) struct AddrW<'a> {
+ w: &'a mut W,
+}
+impl<'a> AddrW<'a> {
+ pub unsafe fn bits(self, v: u32) -> &'a mut W {
+ self.w.bits = v;
+ self.w
+ }
+
+ // TODO: "safe" method take a pointer instead of raw u32
+}
diff --git a/app/src/usb/pipe/ctrl_pipe.rs b/app/src/usb/pipe/ctrl_pipe.rs
new file mode 100644
index 0000000..63390df
--- /dev/null
+++ b/app/src/usb/pipe/ctrl_pipe.rs
@@ -0,0 +1,177 @@
+/// Host Control Pipe.
+///
+/// Offset: 0x0c
+/// Reset: 0xXXXX
+/// Property: PAC Write-Protection, Write-Synchronized, Read-Synchronized
+#[derive(Clone, Copy, Debug)]
+#[repr(C)]
+pub(crate) struct CtrlPipe(u16);
+
+pub(crate) struct R {
+ bits: u16,
+}
+
+pub(crate) struct W {
+ bits: u16,
+}
+
+impl CtrlPipe {
+ pub fn read(&self) -> R {
+ R { bits: self.0 }
+ }
+
+ pub fn write<F>(&mut self, f: F)
+ where
+ F: FnOnce(&mut W) -> &mut W,
+ {
+ let mut w = W { bits: self.0 };
+ f(&mut w);
+ self.0 = w.bits;
+ }
+}
+
+impl From<u16> for CtrlPipe {
+ fn from(v: u16) -> Self {
+ Self(v)
+ }
+}
+
+impl R {
+ /// Value in raw bits.
+ pub fn bits(&self) -> u16 {
+ self.bits
+ }
+
+ pub fn permax(&self) -> PErMaxR {
+ let bits = {
+ const POS: u8 = 12;
+ const MASK: u16 = 0xf;
+ ((self.bits >> POS) & MASK) as u8
+ };
+
+ PErMaxR(bits)
+ }
+
+ pub fn pepnum(&self) -> PEpNumR {
+ let bits = {
+ const POS: u8 = 8;
+ const MASK: u16 = 0xf;
+ ((self.bits >> POS) & MASK) as u8
+ };
+
+ PEpNumR(bits)
+ }
+
+ pub fn pdaddr(&self) -> PDAddrR {
+ let bits = {
+ const POS: u8 = 0;
+ const MASK: u16 = 0x3f;
+ ((self.bits >> POS) & MASK) as u8
+ };
+
+ PDAddrR(bits)
+ }
+}
+
+/// Pipe Error Max Number
+///
+/// These bits define the maximum number of error for this Pipe before
+/// freezing the pipe automatically.
+pub(crate) struct PErMaxR(u8);
+impl PErMaxR {
+ pub fn max(&self) -> u8 {
+ self.0
+ }
+}
+
+/// Pipe EndPoint Number
+///
+/// These bits define the number of endpoint for this Pipe.
+pub(crate) struct PEpNumR(u8);
+impl PEpNumR {
+ pub fn epnum(&self) -> u8 {
+ self.0
+ }
+}
+
+/// Pipe Device Address
+///
+/// These bits define the Device Address for this pipe.
+pub(crate) struct PDAddrR(u8);
+impl PDAddrR {
+ pub fn addr(&self) -> u8 {
+ self.0
+ }
+}
+
+impl W {
+ /// Write raw bits.
+
+ pub unsafe fn bits(&mut self, v: u16) -> &mut Self {
+ self.bits = v;
+ self
+ }
+
+ pub fn permax(&mut self) -> PErMaxW {
+ PErMaxW { w: self }
+ }
+
+ pub fn pepnum(&mut self) -> PEpNumW {
+ PEpNumW { w: self }
+ }
+
+ pub fn pdaddr(&mut self) -> PDAddrW {
+ PDAddrW { w: self }
+ }
+}
+
+pub(crate) struct PErMaxW<'a> {
+ w: &'a mut W,
+}
+impl<'a> PErMaxW<'a> {
+ pub unsafe fn bits(self, v: u8) -> &'a mut W {
+ const POS: u8 = 12;
+ const MASK: u8 = 0xf;
+ self.w.bits &= !((MASK as u16) << POS);
+ self.w.bits |= ((v & MASK) as u16) << POS;
+ self.w
+ }
+
+ pub fn set_max(self, v: u8) -> &'a mut W {
+ unsafe { self.bits(v) }
+ }
+}
+
+pub(crate) struct PEpNumW<'a> {
+ w: &'a mut W,
+}
+impl<'a> PEpNumW<'a> {
+ pub unsafe fn bits(self, v: u8) -> &'a mut W {
+ const POS: u8 = 8;
+ const MASK: u8 = 0xf;
+ self.w.bits &= !((MASK as u16) << POS);
+ self.w.bits |= ((v & MASK) as u16) << POS;
+ self.w
+ }
+
+ pub fn set_epnum(self, v: u8) -> &'a mut W {
+ unsafe { self.bits(v) }
+ }
+}
+
+pub(crate) struct PDAddrW<'a> {
+ w: &'a mut W,
+}
+impl<'a> PDAddrW<'a> {
+ pub unsafe fn bits(self, v: u8) -> &'a mut W {
+ const POS: u8 = 0;
+ const MASK: u8 = 0x3f;
+ self.w.bits &= !((MASK as u16) << POS);
+ self.w.bits |= ((v & MASK) as u16) << POS;
+ self.w
+ }
+
+ pub fn set_addr(self, v: u8) -> &'a mut W {
+ unsafe { self.bits(v) }
+ }
+}
diff --git a/app/src/usb/pipe/ext_reg.rs b/app/src/usb/pipe/ext_reg.rs
new file mode 100644
index 0000000..023ce9f
--- /dev/null
+++ b/app/src/usb/pipe/ext_reg.rs
@@ -0,0 +1,156 @@
+/// §32.8.7.4
+/// Extended Register.
+///
+/// Offset: 0x08
+/// Reset: 0xxxxxxxx
+/// Property: NA
+#[derive(Clone, Copy, Debug)]
+#[repr(C)]
+pub(crate) struct ExtReg(u16);
+
+pub(crate) struct R {
+ bits: u16,
+}
+
+pub(crate) struct W {
+ bits: u16,
+}
+
+impl ExtReg {
+ pub fn read(&self) -> R {
+ R { bits: self.0 }
+ }
+
+ pub fn write<F>(&mut self, f: F)
+ where
+ F: FnOnce(&mut W) -> &mut W,
+ {
+ let mut w = W { bits: self.0 };
+ f(&mut w);
+ self.0 = w.bits;
+ }
+}
+
+impl From<u16> for ExtReg {
+ fn from(v: u16) -> Self {
+ Self(v)
+ }
+}
+
+impl R {
+ /// Value in raw bits.
+ pub fn bits(&self) -> u16 {
+ self.bits
+ }
+
+ pub fn variable(&self) -> VariableR {
+ let bits = {
+ const POS: u8 = 4;
+ const MASK: u16 = 0x7ff;
+ (self.bits >> POS) & MASK
+ };
+
+ VariableR(bits)
+ }
+
+ pub fn subpid(&self) -> SubPIDR {
+ let bits = {
+ const POS: u8 = 0;
+ const MASK: u16 = 0xf;
+ ((self.bits >> POS) & MASK) as u8
+ };
+
+ SubPIDR(bits)
+ }
+}
+
+/// Variable field send with extended token
+///
+/// These bits define the VARIABLE field sent with extended token. See
+/// “Section 2.1.1 Protocol Extension Token in the reference document
+/// ENGINEERING CHANGE NOTICE, USB 2.0 Link Power Management
+/// Addendum.”
+///
+/// To support the USB2.0 Link Power Management addition the VARIABLE
+/// field should be set as described below.
+///
+/// | VARIABLE | Description |
+/// +----------------+-----------------------+
+/// | VARIABLE[3:0] | bLinkState[1] |
+/// | VARIABLE[7:4] | BESL (See LPM ECN)[2] |
+/// | VARIABLE[8] | bRemoteWake[1] |
+/// | VARIABLE[10:9] | Reserved |
+///
+/// [1] for a definition of LPM Token bRemoteWake and bLinkState
+/// fields, refer to "Table 2-3 in the reference document ENGINEERING
+/// CHANGE NOTICE, USB 2.0 Link Power Management Addendum"
+///
+/// [2] for a definition of LPM Token BESL field, refer to "Table 2-3
+/// in the reference document ENGINEERING CHANGE NOTICE, USB 2.0 Link
+/// Power Management Addendum" and "Table X-X1 in Errata for ECN USB
+/// 2.0 Link Power Management.
+pub(crate) struct VariableR(u16);
+impl VariableR {
+ pub fn bits(&self) -> u16 {
+ self.0
+ }
+}
+
+/// SUBPID field with extended token
+///
+/// These bits define the SUBPID field sent with extended token. See
+/// “Section 2.1.1 Protocol Extension Token in the reference document
+/// ENGINEERING CHANGE NOTICE, USB 2.0 Link Power Management
+/// Addendum”.
+///
+/// To support the USB2.0 Link Power Management addition the SUBPID
+/// field should be set as described in “Table 2.2 SubPID Types in the
+/// reference document ENGINEERING CHANGE NOTICE, USB 2.0 Link Power
+/// Management Addendum”.
+pub(crate) struct SubPIDR(u8);
+impl SubPIDR {
+ pub fn bits(&self) -> u8 {
+ self.0
+ }
+}
+
+impl W {
+ /// Write raw bits.
+ pub unsafe fn bits(&mut self, v: u16) -> &mut Self {
+ self.bits = v;
+ self
+ }
+
+ pub fn variable(&mut self) -> VariableW {
+ VariableW { w: self }
+ }
+ pub fn subpid(&mut self) -> SubPIDW {
+ SubPIDW { w: self }
+ }
+}
+
+pub(crate) struct VariableW<'a> {
+ w: &'a mut W,
+}
+impl<'a> VariableW<'a> {
+ pub unsafe fn bits(self, v: u16) -> &'a mut W {
+ const POS: u8 = 4;
+ const MASK: u16 = 0x7ff;
+ self.w.bits &= !((MASK as u16) << POS);
+ self.w.bits |= ((v & MASK) as u16) << POS;
+ self.w
+ }
+}
+
+pub(crate) struct SubPIDW<'a> {
+ w: &'a mut W,
+}
+impl<'a> SubPIDW<'a> {
+ pub unsafe fn bits(self, v: u16) -> &'a mut W {
+ const POS: u8 = 0;
+ const MASK: u16 = 0xf;
+ self.w.bits &= !((MASK as u16) << POS);
+ self.w.bits |= ((v & MASK) as u16) << POS;
+ self.w
+ }
+}
diff --git a/app/src/usb/pipe/pck_size.rs b/app/src/usb/pipe/pck_size.rs
new file mode 100644
index 0000000..5133005
--- /dev/null
+++ b/app/src/usb/pipe/pck_size.rs
@@ -0,0 +1,360 @@
+/// § 32.8.7.3
+/// Packet Size.
+///
+/// Offset: 0x04 & 0x14
+/// Reset: 0xxxxxxxxx
+/// Property: NA
+#[derive(Clone, Copy, Debug)]
+#[repr(C)]
+pub(crate) struct PckSize(u32);
+
+pub(crate) struct R {
+ bits: u32,
+}
+
+pub(crate) struct W {
+ bits: u32,
+}
+
+impl PckSize {
+ pub fn read(&self) -> R {
+ R { bits: self.0 }
+ }
+
+ pub fn write<F>(&mut self, f: F)
+ where
+ F: FnOnce(&mut W) -> &mut W,
+ {
+ let mut w = W { bits: self.0 };
+ f(&mut w);
+ self.0 = w.bits;
+ }
+}
+
+impl From<u32> for PckSize {
+ fn from(v: u32) -> Self {
+ Self(v)
+ }
+}
+
+impl R {
+ /// Value in raw bits.
+ pub fn bits(&self) -> u32 {
+ self.bits
+ }
+
+ pub fn auto_zlp(&self) -> AutoZLPR {
+ let bits = {
+ const POS: u8 = 31;
+ const MASK: u32 = 1;
+ ((self.bits >> POS) & MASK) == 1
+ };
+
+ AutoZLPR(bits)
+ }
+
+ pub fn size(&self) -> SizeR {
+ let bits = {
+ const POS: u8 = 28;
+ const MASK: u32 = 0x7;
+ ((self.bits >> POS) & MASK) as u8
+ };
+
+ SizeR::from(bits)
+ }
+
+ pub fn multi_packet_size(&self) -> MultiPacketSizeR {
+ let bits = {
+ const POS: u8 = 14;
+ const MASK: u32 = 0x3fff;
+ ((self.bits >> POS) & MASK) as u16
+ };
+
+ MultiPacketSizeR(bits)
+ }
+
+ pub fn byte_count(&self) -> ByteCountR {
+ let bits = {
+ const POS: u8 = 8;
+ const MASK: u32 = 0x3f;
+ ((self.bits >> POS) & MASK) as u8
+ };
+
+ ByteCountR(bits)
+ }
+}
+
+/// Automatic Zero Length Packet
+///
+/// This bit defines the automatic Zero Length Packet mode of the
+/// pipe.
+///
+/// When enabled, the USB module will manage the ZLP handshake by
+/// hardware. This bit is for OUT pipes only. When disabled the
+/// handshake should be managed by firmware.
+pub(crate) struct AutoZLPR(bool);
+impl AutoZLPR {
+ pub fn bit(&self) -> bool {
+ self.0
+ }
+
+ pub fn bit_is_set(&self) -> bool {
+ self.bit()
+ }
+
+ pub fn bit_is_clear(&self) -> bool {
+ !self.bit()
+ }
+}
+
+/// Pipe size
+///
+/// These bits contains the size of the pipe.
+///
+/// These bits are cleared upon sending a USB reset.
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub(crate) enum SizeR {
+ Bytes8,
+ Bytes16,
+ Bytes32,
+ Bytes64,
+ Bytes128,
+ Bytes256,
+ Bytes512,
+ Bytes1024,
+}
+
+impl SizeR {
+ pub fn bits(&self) -> u8 {
+ match *self {
+ Self::Bytes8 => 0x0,
+ Self::Bytes16 => 0x1,
+ Self::Bytes32 => 0x2,
+ Self::Bytes64 => 0x3,
+ Self::Bytes128 => 0x4,
+ Self::Bytes256 => 0x5,
+ Self::Bytes512 => 0x6,
+ Self::Bytes1024 => 0x7,
+ }
+ }
+
+ fn is_bytes8(&self) -> bool {
+ *self == Self::Bytes8
+ }
+ fn is_bytes16(&self) -> bool {
+ *self == Self::Bytes16
+ }
+ fn is_bytes32(&self) -> bool {
+ *self == Self::Bytes32
+ }
+ fn is_bytes64(&self) -> bool {
+ *self == Self::Bytes64
+ }
+ fn is_bytes128(&self) -> bool {
+ *self == Self::Bytes128
+ }
+ fn is_bytes256(&self) -> bool {
+ *self == Self::Bytes256
+ }
+ fn is_bytes512(&self) -> bool {
+ *self == Self::Bytes512
+ }
+ fn is_bytes1024(&self) -> bool {
+ *self == Self::Bytes1024
+ }
+}
+
+impl From<u8> for SizeR {
+ fn from(v: u8) -> Self {
+ match v {
+ 0x0 => Self::Bytes8,
+ 0x1 => Self::Bytes16,
+ 0x2 => Self::Bytes32,
+ 0x3 => Self::Bytes64,
+ 0x4 => Self::Bytes128,
+ 0x5 => Self::Bytes256,
+ 0x6 => Self::Bytes512,
+ 0x7 => Self::Bytes1024,
+ _ => panic!("pcksize between 0 and 7 only"),
+ }
+ }
+}
+
+/// Multi Packet IN or OUT size
+///
+/// These bits define the 14-bit value that is used for multi-packet
+/// transfers.
+///
+/// For IN pipes, MULTI_PACKET_SIZE holds the total number of bytes
+/// sent. MULTI_PACKET_SIZE should be written to zero when setting up
+/// a new transfer.
+///
+/// For OUT pipes, MULTI_PACKET_SIZE holds the total data size for the
+/// complete transfer. This value must be a multiple of the maximum
+/// packet size.
+pub(crate) struct MultiPacketSizeR(u16);
+impl MultiPacketSizeR {
+ pub fn bits(&self) -> u16 {
+ self.0
+ }
+}
+
+/// Byte Count
+///
+/// These bits define the 14-bit value that contains number of bytes
+/// sent in the last OUT or SETUP transaction for an OUT pipe, or of
+/// the number of bytes to be received in the next IN transaction for
+/// an input pipe.
+pub(crate) struct ByteCountR(u8);
+impl ByteCountR {
+ pub fn bits(&self) -> u8 {
+ self.0
+ }
+}
+
+impl W {
+ /// Write raw bits.
+ pub unsafe fn bits(&mut self, v: u32) -> &mut Self {
+ self.bits = v;
+ self
+ }
+
+ pub fn auto_zlp(&mut self) -> AutoZLPW {
+ AutoZLPW { w: self }
+ }
+
+ pub fn size(&mut self) -> _SizeW {
+ _SizeW { w: self }
+ }
+
+ pub fn multi_packet_size(&mut self) -> MultiPacketSizeW {
+ MultiPacketSizeW { w: self }
+ }
+
+ pub fn byte_count(&mut self) -> ByteCountW {
+ ByteCountW { w: self }
+ }
+}
+
+pub(crate) struct AutoZLPW<'a> {
+ w: &'a mut W,
+}
+impl<'a> AutoZLPW<'a> {
+ pub fn bit(self, v: bool) -> &'a mut W {
+ const POS: u8 = 31;
+ const MASK: bool = true;
+ self.w.bits &= !((MASK as u32) << POS);
+ self.w.bits |= ((v & MASK) as u32) << POS;
+ self.w
+ }
+
+ pub fn set_bit(self) -> &'a mut W {
+ self.bit(true)
+ }
+
+ pub fn clear_bit(self) -> &'a mut W {
+ self.bit(false)
+ }
+}
+
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub(crate) enum SizeW {
+ Bytes8,
+ Bytes16,
+ Bytes32,
+ Bytes64,
+ Bytes128,
+ Bytes256,
+ Bytes512,
+ Bytes1024,
+}
+impl SizeW {
+ pub fn bits(&self) -> u8 {
+ match *self {
+ Self::Bytes8 => 0,
+ Self::Bytes16 => 1,
+ Self::Bytes32 => 2,
+ Self::Bytes64 => 3,
+ Self::Bytes128 => 4,
+ Self::Bytes256 => 5,
+ Self::Bytes512 => 6,
+ Self::Bytes1024 => 7,
+ }
+ }
+}
+
+/// Proxy for `SizeW`
+pub(crate) struct _SizeW<'a> {
+ w: &'a mut W,
+}
+impl<'a> _SizeW<'a> {
+ pub unsafe fn bits(self, v: u8) -> &'a mut W {
+ const POS: u8 = 28;
+ const MASK: u8 = 0x7;
+ self.w.bits &= !((MASK as u32) << POS);
+ self.w.bits |= ((v & MASK) as u32) << POS;
+ self.w
+ }
+
+ pub fn variant(self, v: SizeW) -> &'a mut W {
+ unsafe { self.bits(v.bits()) }
+ }
+
+ pub fn bytes8(self) -> &'a mut W {
+ self.variant(SizeW::Bytes8)
+ }
+
+ pub fn bytes16(self) -> &'a mut W {
+ self.variant(SizeW::Bytes16)
+ }
+
+ pub fn bytes32(self) -> &'a mut W {
+ self.variant(SizeW::Bytes32)
+ }
+
+ pub fn bytes64(self) -> &'a mut W {
+ self.variant(SizeW::Bytes64)
+ }
+
+ pub fn bytes128(self) -> &'a mut W {
+ self.variant(SizeW::Bytes128)
+ }
+
+ pub fn bytes256(self) -> &'a mut W {
+ self.variant(SizeW::Bytes256)
+ }
+
+ pub fn bytes512(self) -> &'a mut W {
+ self.variant(SizeW::Bytes512)
+ }
+
+ pub fn bytes1024(self) -> &'a mut W {
+ self.variant(SizeW::Bytes1024)
+ }
+}
+
+pub(crate) struct MultiPacketSizeW<'a> {
+ w: &'a mut W,
+}
+impl<'a> MultiPacketSizeW<'a> {
+ pub unsafe fn bits(self, v: u16) -> &'a mut W {
+ const POS: u8 = 14;
+ const MASK: u16 = 0x3fff;
+ self.w.bits &= !((MASK as u32) << POS);
+ self.w.bits |= ((v & MASK) as u32) << POS;
+ self.w
+ }
+}
+
+pub(crate) struct ByteCountW<'a> {
+ w: &'a mut W,
+}
+impl<'a> ByteCountW<'a> {
+ pub unsafe fn bits(self, v: u8) -> &'a mut W {
+ const POS: u8 = 8;
+ const MASK: u8 = 0x3f;
+ self.w.bits &= !((MASK as u32) << POS);
+ self.w.bits |= ((v & MASK) as u32) << POS;
+ self.w
+ }
+}
diff --git a/app/src/usb/pipe/status_bk.rs b/app/src/usb/pipe/status_bk.rs
new file mode 100644
index 0000000..4ddb420
--- /dev/null
+++ b/app/src/usb/pipe/status_bk.rs
@@ -0,0 +1,170 @@
+/// §32.8.7.5
+/// Host Status Bank.
+///
+/// Offset: 0x0a & 0x1a
+/// Reset: 0xxxxxxx
+/// Property: NA
+#[derive(Clone, Copy, Debug)]
+#[repr(C)]
+pub(crate) struct StatusBk(u8);
+
+pub(crate) struct R {
+ bits: u8,
+}
+
+pub(crate) struct W {
+ bits: u8,
+}
+
+impl StatusBk {
+ pub fn read(&self) -> R {
+ R { bits: self.0 }
+ }
+
+ pub fn write<F>(&mut self, f: F)
+ where
+ F: FnOnce(&mut W) -> &mut W,
+ {
+ let mut w = W { bits: self.0 };
+ f(&mut w);
+ self.0 = w.bits;
+ }
+}
+
+impl From<u8> for StatusBk {
+ fn from(v: u8) -> Self {
+ Self(v)
+ }
+}
+
+impl R {
+ /// Value in raw bits.
+ pub fn bits(&self) -> u8 {
+ self.bits
+ }
+
+ pub fn errorflow(&self) -> ErrorFlowR {
+ let bits = {
+ const POS: u8 = 1;
+ const MASK: u8 = 1;
+ ((self.bits >> POS) & MASK) == 1
+ };
+
+ ErrorFlowR(bits)
+ }
+
+ pub fn crcerr(&self) -> CRCErrR {
+ let bits = {
+ const POS: u8 = 0;
+ const MASK: u8 = 1;
+ ((self.bits >> POS) & MASK) == 1
+ };
+
+ CRCErrR(bits)
+ }
+}
+
+/// Error Flow Status
+///
+/// This bit defines the Error Flow Status.
+///
+/// This bit is set when a Error Flow has been detected during
+/// transfer from/towards this bank.
+///
+/// For IN transfer, a NAK handshake has been received. For OUT
+/// transfer, a NAK handshake has been received. For Isochronous IN
+/// transfer, an overrun condition has occurred. For Isochronous OUT
+/// transfer, an underflow condition has occurred.
+pub(crate) struct ErrorFlowR(bool);
+impl ErrorFlowR {
+ pub fn bit(&self) -> bool {
+ self.0
+ }
+
+ pub fn bit_is_set(&self) -> bool {
+ self.bit()
+ }
+
+ pub fn bit_is_clear(&self) -> bool {
+ !self.bit_is_set()
+ }
+}
+
+/// CRC Error
+///
+/// This bit defines the CRC Error Status.
+///
+/// This bit is set when a CRC error has been detected in an
+/// isochronous IN endpoint bank.
+pub(crate) struct CRCErrR(bool);
+impl CRCErrR {
+ pub fn bit(&self) -> bool {
+ self.0
+ }
+
+ pub fn bit_is_set(&self) -> bool {
+ self.bit()
+ }
+
+ pub fn bit_is_clear(&self) -> bool {
+ !self.bit_is_set()
+ }
+}
+
+impl W {
+ /// Write raw bits.
+ pub unsafe fn bits(&mut self, v: u8) -> &mut Self {
+ self.bits = v;
+ self
+ }
+
+ pub fn errorflow(&mut self) -> ErrorFlowW {
+ ErrorFlowW { w: self }
+ }
+
+ pub fn crcerr(&mut self) -> CRCErrW {
+ CRCErrW { w: self }
+ }
+}
+
+pub(crate) struct ErrorFlowW<'a> {
+ w: &'a mut W,
+}
+impl<'a> ErrorFlowW<'a> {
+ pub fn bit(self, v: bool) -> &'a mut W {
+ const POS: u8 = 1;
+ const MASK: bool = true;
+ self.w.bits &= !((MASK as u8) << POS);
+ self.w.bits |= ((v & MASK) as u8) << POS;
+ self.w
+ }
+
+ pub fn set_bit(self) -> &'a mut W {
+ self.bit(true)
+ }
+
+ pub fn clear_bit(self) -> &'a mut W {
+ self.bit(false)
+ }
+}
+
+pub(crate) struct CRCErrW<'a> {
+ w: &'a mut W,
+}
+impl<'a> CRCErrW<'a> {
+ pub fn bit(self, v: bool) -> &'a mut W {
+ const POS: u8 = 0;
+ const MASK: bool = true;
+ self.w.bits &= !((MASK as u8) << POS);
+ self.w.bits |= ((v & MASK) as u8) << POS;
+ self.w
+ }
+
+ pub fn set_bit(self) -> &'a mut W {
+ self.bit(true)
+ }
+
+ pub fn clear_bit(self) -> &'a mut W {
+ self.bit(false)
+ }
+}
diff --git a/app/src/usb/pipe/status_pipe.rs b/app/src/usb/pipe/status_pipe.rs
new file mode 100644
index 0000000..4f8eb41
--- /dev/null
+++ b/app/src/usb/pipe/status_pipe.rs
@@ -0,0 +1,407 @@
+/// Host Status Pipe.
+///
+/// Offset: 0x0e & 0x1e
+/// Reset: 0xxxxxx
+/// Property: PAC Write-Protection, Write-Synchronized, Read-Synchronized
+#[derive(Clone, Copy, Debug)]
+#[repr(C)]
+pub(crate) struct StatusPipe(u16);
+
+pub(crate) struct R {
+ bits: u16,
+}
+pub(crate) struct W {
+ bits: u16,
+}
+
+impl StatusPipe {
+ pub fn read(&self) -> R {
+ R { bits: self.0 }
+ }
+
+ pub fn write<F>(&mut self, f: F)
+ where
+ F: FnOnce(&mut W) -> &mut W,
+ {
+ let mut w = W { bits: self.0 };
+ f(&mut w);
+ self.0 = w.bits;
+ }
+}
+
+impl From<u16> for StatusPipe {
+ fn from(v: u16) -> Self {
+ Self(v)
+ }
+}
+
+impl R {
+ /// Value in raw bits.
+ pub fn bits(&self) -> u16 {
+ self.bits
+ }
+
+ pub fn ercnt(&self) -> ErCntR {
+ let bits = {
+ const POS: u8 = 5;
+ const MASK: u16 = 0x7;
+ ((self.bits >> POS) & MASK) as u8
+ };
+
+ ErCntR(bits)
+ }
+
+ pub fn crc16er(&self) -> CRC16ErR {
+ let bits = {
+ const POS: u8 = 4;
+ const MASK: u16 = 1;
+ ((self.bits >> POS) & MASK) == 1
+ };
+
+ CRC16ErR(bits)
+ }
+
+ pub fn touter(&self) -> TOutErrR {
+ let bits = {
+ const POS: u8 = 3;
+ const MASK: u16 = 1;
+
+ ((self.bits >> POS) & MASK) == 1
+ };
+
+ TOutErrR(bits)
+ }
+
+ pub fn pider(&self) -> PIDErR {
+ let bits = {
+ const POS: u8 = 2;
+ const MASK: u16 = 1;
+
+ ((self.bits >> POS) & MASK) == 1
+ };
+
+ PIDErR(bits)
+ }
+
+ pub fn dapider(&self) -> DaPIDErR {
+ let bits = {
+ const POS: u8 = 1;
+ const MASK: u16 = 1;
+
+ ((self.bits >> POS) & MASK) == 1
+ };
+
+ DaPIDErR(bits)
+ }
+
+ pub fn dtgler(&self) -> DTglErR {
+ let bits = {
+ const POS: u8 = 0;
+ const MASK: u16 = 1;
+
+ ((self.bits >> POS) & MASK) == 1
+ };
+
+ DTglErR(bits)
+ }
+}
+
+/// Pipe Error Counter
+///
+/// The number of errors detected on the pipe.
+pub(crate) struct ErCntR(u8);
+impl ErCntR {
+ pub fn bits(&self) -> u8 {
+ self.0
+ }
+}
+
+/// CRC16 ERROR
+///
+/// This bit defines the CRC16 Error Status.
+///
+/// This bit is set when a CRC 16 error has been detected during a IN
+/// transactions.
+pub(crate) struct CRC16ErR(bool);
+impl CRC16ErR {
+ pub fn bit(&self) -> bool {
+ self.0
+ }
+
+ pub fn bit_is_set(&self) -> bool {
+ self.bit()
+ }
+
+ pub fn bit_is_clear(&self) -> bool {
+ !self.bit_is_set()
+ }
+}
+
+/// TIME OUT ERROR
+///
+/// This bit defines the Time Out Error Status.
+///
+/// This bit is set when a Time Out error has been detected during a
+/// USB transaction.
+pub(crate) struct TOutErrR(bool);
+impl TOutErrR {
+ pub fn bit(&self) -> bool {
+ self.0
+ }
+
+ pub fn bit_is_set(&self) -> bool {
+ self.bit()
+ }
+
+ pub fn bit_is_clear(&self) -> bool {
+ !self.bit_is_set()
+ }
+}
+
+/// PID ERROR
+///
+/// This bit defines the PID Error Status.
+///
+/// This bit is set when a PID error has been detected during a USB
+/// transaction.
+pub(crate) struct PIDErR(bool);
+impl PIDErR {
+ pub fn bit(&self) -> bool {
+ self.0
+ }
+
+ pub fn bit_is_set(&self) -> bool {
+ self.bit()
+ }
+
+ pub fn bit_is_clear(&self) -> bool {
+ !self.bit_is_set()
+ }
+}
+
+/// Data PID ERROR
+///
+/// This bit defines the PID Error Status.
+///
+/// This bit is set when a Data PID error has been detected during a
+/// USB transaction.
+pub(crate) struct DaPIDErR(bool);
+impl DaPIDErR {
+ pub fn bit(&self) -> bool {
+ self.0
+ }
+
+ pub fn bit_is_set(&self) -> bool {
+ self.bit()
+ }
+
+ pub fn bit_is_clear(&self) -> bool {
+ !self.bit_is_set()
+ }
+}
+
+/// Data Toggle Error
+///
+/// This bit defines the Data Toggle Error Status.
+///
+/// This bit is set when a Data Toggle Error has been detected.
+pub(crate) struct DTglErR(bool);
+impl DTglErR {
+ pub fn bit(&self) -> bool {
+ self.0
+ }
+
+ pub fn bit_is_set(&self) -> bool {
+ self.bit()
+ }
+
+ pub fn bit_is_clear(&self) -> bool {
+ !self.bit_is_set()
+ }
+}
+
+impl W {
+ /// Write raw bits.
+ pub unsafe fn bits(&mut self, v: u16) -> &mut Self {
+ self.bits = v;
+ self
+ }
+
+ pub fn ercnt(&mut self) -> ErCntW {
+ ErCntW { w: self }
+ }
+
+ pub fn crc16er(&mut self) -> CRC16ErW {
+ CRC16ErW { w: self }
+ }
+
+ pub fn touter(&mut self) -> TOutErW {
+ TOutErW { w: self }
+ }
+
+ pub fn pider(&mut self) -> PIDErW {
+ PIDErW { w: self }
+ }
+
+ pub fn dapider(&mut self) -> DaPIDErW {
+ DaPIDErW { w: self }
+ }
+
+ pub fn dtgler(&mut self) -> DTglErW {
+ DTglErW { w: self }
+ }
+}
+
+/// Pipe Error Counter
+///
+/// The number of errors detected on the pipe.
+pub(crate) struct ErCntW<'a> {
+ w: &'a mut W,
+}
+impl<'a> ErCntW<'a> {
+ pub unsafe fn bits(self, v: u8) -> &'a mut W {
+ const POS: u8 = 5;
+ const MASK: u8 = 0x7;
+ self.w.bits &= !((MASK as u16) << POS);
+ self.w.bits |= ((v & MASK) as u16) << POS;
+ self.w
+ }
+
+ pub fn set_count(self, v: u8) -> &'a mut W {
+ unsafe { self.bits(v) }
+ }
+}
+
+/// CRC16 ERROR
+///
+/// This bit defines the CRC16 Error Status.
+///
+/// This bit is set when a CRC 16 error has been detected during a IN
+/// transactions.
+pub(crate) struct CRC16ErW<'a> {
+ w: &'a mut W,
+}
+impl<'a> CRC16ErW<'a> {
+ pub fn bit(self, v: bool) -> &'a mut W {
+ const POS: u8 = 4;
+ const MASK: bool = true;
+ self.w.bits &= !((MASK as u16) << POS);
+ self.w.bits |= ((v & MASK) as u16) << POS;
+ self.w
+ }
+
+ pub fn set_bit(self) -> &'a mut W {
+ self.bit(true)
+ }
+
+ pub fn clear_bit(self) -> &'a mut W {
+ self.bit(false)
+ }
+}
+
+/// TIME OUT ERROR
+///
+/// This bit defines the Time Out Error Status.
+///
+/// This bit is set when a Time Out error has been detected during a
+/// USB transaction.
+pub(crate) struct TOutErW<'a> {
+ w: &'a mut W,
+}
+impl<'a> TOutErW<'a> {
+ pub fn bit(self, v: bool) -> &'a mut W {
+ const POS: u8 = 3;
+ const MASK: bool = true;
+ self.w.bits &= !((MASK as u16) << POS);
+ self.w.bits |= ((v & MASK) as u16) << POS;
+ self.w
+ }
+
+ pub fn set_bit(self) -> &'a mut W {
+ self.bit(true)
+ }
+
+ pub fn clear_bit(self) -> &'a mut W {
+ self.bit(false)
+ }
+}
+
+/// PID ERROR
+///
+/// This bit defines the PID Error Status.
+///
+/// This bit is set when a PID error has been detected during a USB
+/// transaction.
+pub(crate) struct PIDErW<'a> {
+ w: &'a mut W,
+}
+impl<'a> PIDErW<'a> {
+ pub fn bit(self, v: bool) -> &'a mut W {
+ const POS: u8 = 2;
+ const MASK: bool = true;
+ self.w.bits &= !((MASK as u16) << POS);
+ self.w.bits |= ((v & MASK) as u16) << POS;
+ self.w
+ }
+
+ pub fn set_bit(self) -> &'a mut W {
+ self.bit(true)
+ }
+
+ pub fn clear_bit(self) -> &'a mut W {
+ self.bit(false)
+ }
+}
+
+/// Data PID ERROR
+///
+/// This bit defines the PID Error Status.
+///
+/// This bit is set when a Data PID error has been detected during a
+/// USB transaction.
+pub(crate) struct DaPIDErW<'a> {
+ w: &'a mut W,
+}
+impl<'a> DaPIDErW<'a> {
+ pub fn bit(self, v: bool) -> &'a mut W {
+ const POS: u8 = 1;
+ const MASK: bool = true;
+ self.w.bits &= !((MASK as u16) << POS);
+ self.w.bits |= ((v & MASK) as u16) << POS;
+ self.w
+ }
+
+ pub fn set_bit(self) -> &'a mut W {
+ self.bit(true)
+ }
+
+ pub fn clear_bit(self) -> &'a mut W {
+ self.bit(false)
+ }
+}
+
+/// Data Toggle Error
+///
+/// This bit defines the Data Toggle Error Status.
+///
+/// This bit is set when a Data Toggle Error has been detected.
+pub(crate) struct DTglErW<'a> {
+ w: &'a mut W,
+}
+impl<'a> DTglErW<'a> {
+ pub fn bit(self, v: bool) -> &'a mut W {
+ const POS: u8 = 0;
+ const MASK: bool = true;
+ self.w.bits &= !((MASK as u16) << POS);
+ self.w.bits |= ((v & MASK) as u16) << POS;
+ self.w
+ }
+
+ pub fn set_bit(self) -> &'a mut W {
+ self.bit(true)
+ }
+
+ pub fn clear_bit(self) -> &'a mut W {
+ self.bit(false)
+ }
+}
diff --git a/app/src/usb/usbproto.rs b/app/src/usb/usbproto.rs
new file mode 100644
index 0000000..9a86ed7
--- /dev/null
+++ b/app/src/usb/usbproto.rs
@@ -0,0 +1,331 @@
+/// USB Protocol level types and functions.
+///
+/// Everything in here is defined by the USB specification, and
+/// hardware independent.
+
+// TODO: Put protocol section references in for types and
+// documentation.
+
+#[derive(Copy, Clone, Debug, Default)]
+#[repr(C, packed)]
+pub struct USBDeviceDescriptor {
+ pub b_length: u8,
+ pub b_descriptor_type: u8,
+ pub bcd_usb: u16,
+ pub b_device_class: u8,
+ pub b_device_sub_class: u8,
+ pub b_device_protocol: u8,
+ pub b_max_packet_size: u8,
+ pub id_vendor: u16,
+ pub id_product: u16,
+ pub bcd_device: u16,
+ pub i_manufacturer: u8,
+ pub i_product: u8,
+ pub i_serial_number: u8,
+ pub b_num_configurations: u8,
+}
+
+#[derive(Copy, Clone, Debug, Default)]
+#[repr(C, packed)]
+pub struct USBConfigurationDescriptor {
+ pub b_length: u8,
+ pub b_descriptor_type: u8,
+ pub w_total_length: u16,
+ pub b_num_interfaces: u8,
+ pub b_configuration_value: u8,
+ pub i_configuration: u8,
+ pub bm_attributes: u8,
+ pub b_max_power: u8,
+}
+
+#[derive(Copy, Clone, Debug, Default)]
+#[repr(C, packed)]
+pub struct USBInterfaceDescriptor {
+ pub b_length: u8,
+ pub b_descriptor_type: u8,
+ pub b_interface_number: u8,
+ pub b_alternate_setting: u8,
+ pub b_num_endpoints: u8,
+ pub b_interface_class: u8,
+ pub b_interface_sub_class: u8,
+ pub b_interface_protocol: u8,
+ pub i_interface: u8,
+}
+
+#[derive(Copy, Clone, Debug, Default)]
+#[repr(C, packed)]
+pub struct USBEndpointDescriptor {
+ pub b_length: u8,
+ pub b_descriptor_type: u8,
+ pub b_endpoint_address: u8,
+ pub bm_attributes: u8,
+ pub w_max_packet_size: u16,
+ pub b_interval: u8,
+}
+
+#[derive(Copy, Clone, Debug)]
+#[repr(C, packed)]
+pub struct USBSetupPacket {
+ pub bm_request_type: BMRequestType,
+ pub b_request: USBRequest,
+ pub w_value: WValue,
+ pub w_index: u16,
+ pub w_length: u16,
+}
+// TODO: shortcuts for standard device requests §9.4 of USB standard.
+
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum USBSetupDirection {
+ HostToDevice = 0x00,
+ DeviceToHost = 0x80,
+}
+impl<T> From<T> for USBSetupDirection
+where
+ T: Into<u8>,
+{
+ fn from(v: T) -> Self {
+ match v.into() {
+ 0x00 => Self::HostToDevice,
+ 0x80 => Self::DeviceToHost,
+ _ => panic!("direction can only be 0x00 or 0x80"),
+ }
+ }
+}
+
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum USBSetupType {
+ Standard = 0x00,
+ Class = 0x20,
+ Vendor = 0x40,
+}
+impl<T> From<T> for USBSetupType
+where
+ T: Into<u8>,
+{
+ fn from(v: T) -> Self {
+ match v.into() {
+ 0x00 => Self::Standard,
+ 0x20 => Self::Class,
+ 0x40 => Self::Vendor,
+ _ => panic!("type can only be 0x00, 0x20, or 0x40"),
+ }
+ }
+}
+
+#[derive(Copy, Clone, Debug, PartialEq)]
+pub enum USBSetupRecipient {
+ Device = 0x00,
+ Interface = 0x01,
+ Endpoint = 0x02,
+ Other = 0x03,
+}
+impl<T> From<T> for USBSetupRecipient
+where
+ T: Into<u8>,
+{
+ fn from(v: T) -> Self {
+ match v.into() {
+ 0x00 => Self::Device,
+ 0x01 => Self::Interface,
+ 0x02 => Self::Endpoint,
+ 0x03 => Self::Other,
+ _ => panic!("recipient can only be between 0 and 3"),
+ }
+ }
+}
+
+#[derive(Clone, Copy, Debug, Default, PartialEq)]
+#[repr(C)]
+pub struct BMRequestType(u8);
+impl BMRequestType {
+ // Get descriptor request type.
+ pub fn get_descr() -> Self {
+ Self::from((
+ USBSetupDirection::DeviceToHost,
+ USBSetupType::Standard,
+ USBSetupRecipient::Device,
+ ))
+ }
+
+ // Set request type for all but 'set feature' and 'set interface'.
+ pub fn set() -> Self {
+ Self::from((
+ USBSetupDirection::HostToDevice,
+ USBSetupType::Standard,
+ USBSetupRecipient::Device,
+ ))
+ }
+
+ // Get interface request type.
+ pub fn cl_get_intf() -> Self {
+ Self::from((
+ USBSetupDirection::DeviceToHost,
+ USBSetupType::Class,
+ USBSetupRecipient::Interface,
+ ))
+ }
+
+ pub fn recipient(&self) -> USBSetupRecipient {
+ const POS: u8 = 0;
+ const MASK: u8 = 0x1f;
+ (self.0 & (MASK << POS)).into()
+ }
+
+ pub fn set_recipient(&mut self, v: USBSetupRecipient) {
+ const POS: u8 = 0;
+ const MASK: u8 = 0x1f;
+ self.0 &= !(MASK << POS);
+ self.0 |= v as u8 & MASK;
+ }
+
+ pub fn typ(&self) -> USBSetupType {
+ const POS: u8 = 5;
+ const MASK: u8 = 0x3;
+ (self.0 & (MASK << POS)).into()
+ }
+
+ pub fn set_typ(&mut self, v: USBSetupType) {
+ const POS: u8 = 5;
+ const MASK: u8 = 0x3;
+ self.0 &= !(MASK << POS);
+ self.0 |= v as u8 & MASK;
+ }
+
+ pub fn direction(&self) -> USBSetupDirection {
+ const POS: u8 = 7;
+ const MASK: u8 = 0x1;
+ (self.0 & (MASK << POS)).into()
+ }
+
+ pub fn set_direction(&mut self, v: USBSetupDirection) {
+ const POS: u8 = 7;
+ const MASK: u8 = 0x1;
+ self.0 &= !(MASK << POS);
+ self.0 |= v as u8 & MASK;
+ }
+}
+impl From<u8> for BMRequestType {
+ fn from(v: u8) -> Self {
+ Self(v)
+ }
+}
+impl From<(USBSetupDirection, USBSetupType, USBSetupRecipient)> for BMRequestType {
+ fn from(v: (USBSetupDirection, USBSetupType, USBSetupRecipient)) -> Self {
+ Self(v.0 as u8 | v.1 as u8 | v.2 as u8)
+ }
+}
+
+#[derive(Clone, Copy, Debug, Default, PartialEq)]
+#[repr(C)]
+pub struct WValue(u16);
+impl WValue {
+ pub fn w_value_lo(&self) -> u8 {
+ const POS: u8 = 0;
+ const MASK: u16 = 0xff;
+ ((self.0 >> POS) & MASK) as u8
+ }
+
+ pub fn set_w_value_lo(&mut self, v: u8) {
+ const POS: u8 = 0;
+ const MASK: u8 = 0xff;
+ self.0 &= !((MASK as u16) << POS);
+ self.0 |= ((v & MASK) as u16) << POS;
+ }
+
+ pub fn w_value_hi(&self) -> u8 {
+ const POS: u8 = 8;
+ const MASK: u16 = 0xff;
+ ((self.0 >> POS) & MASK) as u8
+ }
+
+ pub fn set_w_value_hi(&mut self, v: u8) {
+ const POS: u8 = 8;
+ const MASK: u8 = 0xff;
+ self.0 &= !((MASK as u16) << POS);
+ self.0 |= ((v & MASK) as u16) << POS;
+ }
+}
+impl From<(u8, u8)> for WValue {
+ fn from(v: (u8, u8)) -> Self {
+ let mut rc = Self(0);
+ rc.set_w_value_lo(v.0);
+ rc.set_w_value_hi(v.1);
+ rc
+ }
+}
+
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub enum USBRequest {
+ GetStatus = 0,
+ ClearFeature = 1,
+ SetFeature = 3,
+ SetAddress = 5,
+ GetDescriptor = 6,
+ SetDescriptor = 7,
+ GetConfiguration = 8,
+ SetConfiguration = 9,
+ GetInterface = 10,
+ SetInterface = 11,
+ SynchFrame = 12,
+}
+impl<T> From<T> for USBRequest
+where
+ T: Into<u8>,
+{
+ fn from(v: T) -> Self {
+ match v.into() {
+ 0 => Self::GetStatus,
+ 1 => Self::ClearFeature,
+ 3 => Self::SetFeature,
+ 5 => Self::SetAddress,
+ 6 => Self::GetDescriptor,
+ 7 => Self::SetDescriptor,
+ 8 => Self::GetConfiguration,
+ 9 => Self::SetConfiguration,
+ 10 => Self::GetInterface,
+ 11 => Self::SetInterface,
+ 12 => Self::SynchFrame,
+ _ => panic!("invalid request value"),
+ }
+ }
+}
+
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub enum USBFeature {
+ EndpointHalt = 0,
+ DeviceRemoteWakeup = 1,
+ TestMode = 2,
+}
+
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub enum USBDescriptor {
+ Device = 0x01,
+ Configuration = 0x02,
+ String = 0x03,
+ Interface = 0x04,
+ Endpoint = 0x05,
+ DeviceQualifier = 0x06,
+ OtherSpeed = 0x07,
+ InterfacePower = 0x08,
+ OTG = 0x09,
+}
+
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub enum HIDDescriptor {
+ HID = 0x21,
+}
+
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub enum OTGFeature {
+ BHNPEnable = 3,
+ AHNPSupport = 4,
+ AAltHNPSupport = 5,
+}
+
+#[derive(Clone, Copy, Debug, PartialEq)]
+pub enum USBTransferType {
+ Control = 0x00,
+ Isochronous = 0x01,
+ Bulk = 0x02,
+ Interrupt = 0x03,
+}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 23:09:35 +0000