1 files changed, 192 insertions, 0 deletions
diff --git a/examples/simple/main.rs b/examples/simple/main.rs
new file mode 100755
index 0000000..84b5e33
--- /dev/null
+++ b/examples/simple/main.rs
@@ -0,0 +1,192 @@
+#![no_std]
+#![no_main]
+#![feature(const_fn)]
+#![feature(const_transmute)]
+#![allow(dead_code)]
+
+mod logger;
+mod macros;
+mod rtc;
+
+use atsamd_usb_host::SAMDHost;
+use bootkbd::BootKeyboard;
+use clint::HandlerArray;
+use cortex_m::asm::wfi;
+use cortex_m_rt::{entry, exception, ExceptionFrame};
+use embedded_hal::digital::v2::OutputPin;
+use log::{debug, info, LevelFilter};
+use trinket_m0::{
+    self as hal,
+    clock::GenericClockController,
+    gpio::{OpenDrain, Output, Pa10, Pa6, Pa7, PfD},
+    sercom,
+    target_device::{interrupt, Interrupt},
+    time::*,
+    CorePeripherals, Peripherals,
+};
+use usb_host::Driver;
+
+static HANDLERS: HandlerArray = HandlerArray::new();
+
+static mut LED: usize = 0;
+
+#[entry]
+fn main() -> ! {
+    let mut peripherals = Peripherals::take().expect("taking peripherals");
+    let mut core = CorePeripherals::take().expect("taking core peripherals");
+
+    let mut clocks = GenericClockController::with_internal_32kosc(
+        peripherals.GCLK,
+        &mut peripherals.PM,
+        &mut peripherals.SYSCTRL,
+        &mut peripherals.NVMCTRL,
+    );
+
+    let mut pins = hal::Pins::new(peripherals.PORT);
+
+    let uart = hal::uart(
+        &mut clocks,
+        115_200.hz(),
+        peripherals.SERCOM0,
+        &mut core.NVIC,
+        &mut peripherals.PM,
+        pins.d3,
+        pins.d4,
+        &mut pins.port,
+    );
+
+    let mut red_led = pins.d13.into_open_drain_output(&mut pins.port);
+    red_led.set_low().expect("turning off red LED");
+    unsafe { LED = core::mem::transmute(&red_led) }
+
+    // We do the transmute because, while all the underlying data is
+    // static, we're unable to get a referecence to the UART or LED
+    // until run-time. Another option would be to use Option in the
+    // SerialLogger definition, but that requires a check every time
+    // they might be used.
+    let uart_wrapped = logger::WriteWrapper::new(uart);
+    let logger = logger::SerialLogger::new(uart_wrapped, red_led);
+
+    // Wow, would I love to not be annotating this type.
+    let logger_ref: &'static logger::SerialLogger<
+        sercom::UART0<sercom::Sercom0Pad3<Pa7<PfD>>, sercom::Sercom0Pad2<Pa6<PfD>>, (), ()>,
+        Pa10<Output<OpenDrain>>,
+    > = unsafe { core::mem::transmute(&logger) };
+    unsafe { log::set_logger_racy(logger_ref).expect("couldn't set logger") };
+    log::set_max_level(LevelFilter::Info);
+
+    info!("setting up timer");
+    let mut rtc_handler = rtc::setup(peripherals.RTC, &mut clocks);
+
+    info!("setting up usb host");
+    let (mut usb_host, mut usb_handler) = SAMDHost::new(
+        peripherals.USB,
+        pins.usb_sof,
+        pins.usb_dm,
+        pins.usb_dp,
+        Some(pins.usb_host_enable),
+        &mut pins.port,
+        &mut clocks,
+        &mut peripherals.PM,
+        &rtc::millis,
+    );
+
+    let mut bootkbd = BootKeyboard::new();
+    let mut drivers: [&mut dyn Driver; 1] = [&mut bootkbd];
+
+    info!("setting up handlers");
+    HANDLERS.with_overrides(|hs| {
+        hs.register(0, &mut rtc_handler);
+        core.NVIC.enable(Interrupt::RTC);
+
+        hs.register(1, &mut usb_handler);
+        unsafe { core.NVIC.set_priority(Interrupt::USB, 0) };
+        core.NVIC.enable(Interrupt::USB);
+
+        info!("Boot up complete.");
+
+        loop {
+            usb_host.task(&mut drivers[..]);
+            wfi();
+        }
+    });
+    unreachable!();
+}
+
+#[panic_handler]
+fn panic_handler(pi: &core::panic::PanicInfo) -> ! {
+    let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
+    red_led.set_high().ok();
+
+    logln_now!("~~~ PANIC ~~~");
+    logln_now!("{}", pi);
+    logln_now!("flushing log");
+    loop {
+        log::logger().flush();
+        wfi()
+    }
+}
+
+#[exception]
+fn HardFault(ef: &ExceptionFrame) -> ! {
+    let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
+    red_led.set_high().ok();
+
+    log::logger().flush();
+    logln_now!("!!! Hard Fault - ef: {:?} !!!", ef);
+    logln_now!("flushing log");
+    loop {
+        log::logger().flush();
+        wfi()
+    }
+}
+
+#[exception]
+fn DefaultHandler(interrupt: i16) {
+    let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
+    red_led.set_high().ok();
+
+    debug!("*** Default Handler: {} ***", interrupt);
+}
+
+#[exception]
+fn NonMaskableInt() {
+    let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
+    red_led.set_high().ok();
+
+    debug!("+++ NonMaskableInt +++");
+}
+
+#[exception]
+fn SVCall() {
+    let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
+    red_led.set_high().ok();
+
+    debug!("+++ SVCall +++");
+}
+
+#[exception]
+fn PendSV() {
+    let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
+    red_led.set_high().ok();
+
+    debug!("+++ PendSV +++");
+}
+
+#[exception]
+fn SysTick() {
+    let red_led: &mut Pa10<Output<OpenDrain>> = unsafe { core::mem::transmute(LED) };
+    red_led.set_high().ok();
+
+    debug!("+++ SysTick +++");
+}
+
+#[interrupt]
+fn RTC() {
+    HANDLERS.call(0);
+}
+
+#[interrupt]
+fn USB() {
+    HANDLERS.call(1);
+}