1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
|
//! BLE interface.
#![no_std]
#![no_main]
mod i2c;
mod logger;
mod macros;
mod rtc;
mod uarte1;
use clint::HandlerArray;
use core::mem;
use cortex_m::asm::wfi;
use cortex_m_rt::{entry, exception, ExceptionFrame};
use log::{info, LevelFilter};
#[allow(unused_imports)]
extern crate panic_semihosting;
use nrf52840_mdk_bsp::{
hal::{
gpio::{Floating, Input, Level, Output, Pin, PushPull},
target::{interrupt, Interrupt, UARTE0},
twis::{self, Twis},
uarte::{self, Baudrate as UartBaudrate, Parity as UartParity, Uarte},
Clocks, Rtc,
},
Board,
};
const I2C_ADDR: u8 = 4;
// TODO:
// * set up serial reader for trinket
// * and, finally, bluetooth
// Interrupt handler table.
static HANDLERS: HandlerArray = HandlerArray::new();
#[entry]
fn main() -> ! {
let nrf52 = Board::take().unwrap();
let uart_wrapped = logger::WriteWrapper::new(nrf52.cdc);
let logger = logger::SerialLogger::new(uart_wrapped);
let logger_ref: &'static logger::SerialLogger<UARTE0> = unsafe { mem::transmute(&logger) };
log::set_logger(logger_ref).expect("setting logger");
log::set_max_level(LevelFilter::Trace);
nrf52.RTC0.intenset.write(|w| w.tick().set());
let mut nvic = nrf52.NVIC;
let mut rtc_handler = rtc::setup(Rtc::new(nrf52.RTC0), Clocks::new(nrf52.CLOCK));
let (mut twis_reader, mut twis_handler) = i2c::setup(Twis::new(
I2C_ADDR,
nrf52.TWIS0,
twis::Pins {
scl: nrf52.pins.P0_06.into_floating_input().degrade(),
sda: nrf52.pins.P0_07.into_floating_input().degrade(),
},
));
let txp = nrf52
.pins
.P0_26
.into_push_pull_output(Level::High)
.degrade();
let rxp = nrf52.pins.P0_25.into_floating_input().degrade();
let uarte1 = uarte1(nrf52.UARTE1, txp, rxp);
let (mut uarte1_reader, mut uarte1_handler) = uarte1::setup(uarte1);
HANDLERS.with_overrides(|hs| {
hs.register(0, &mut rtc_handler);
nvic.enable(Interrupt::RTC0);
hs.register(1, &mut twis_handler);
nvic.enable(Interrupt::SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0);
hs.register(2, &mut uarte1_handler);
nvic.enable(Interrupt::UARTE1);
info!("Bootstrap complete.");
let mut last_tick = rtc::millis();
last_tick -= last_tick % 1024;
let mut buf: [u8; 256] = [0; 256];
loop {
let tick = rtc::millis();
if tick >= last_tick + 1024 {
last_tick = tick;
last_tick -= last_tick % 1024;
}
let mut len = twis_reader.shift_into(&mut buf);
while len > 0 {
info!("i²c data: {:?}", &buf[0..len]);
len = twis_reader.shift_into(&mut buf);
}
let mut len = uarte1_reader.shift_into(&mut buf);
while len > 0 {
info!(
"serial {}: {}",
len,
core::str::from_utf8(&buf[0..len]).expect("utf8conv")
);
len = uarte1_reader.shift_into(&mut buf);
}
wfi();
}
});
unreachable!();
}
fn uarte1<U>(uarte: U, tx: Pin<Output<PushPull>>, rx: Pin<Input<Floating>>) -> Uarte<U>
where
U: uarte::Instance,
{
Uarte::new(
uarte,
uarte::Pins {
txd: tx,
rxd: rx,
cts: None,
rts: None,
},
UartParity::EXCLUDED,
UartBaudrate::BAUD115200,
)
}
#[exception]
fn HardFault(ef: &ExceptionFrame) -> ! {
log::logger().flush();
logln_now!("!!! Hard Fault - ef: {:?} !!!", ef);
logln_now!("flushing log");
loop {
log::logger().flush();
wfi()
}
}
#[interrupt]
fn RTC0() {
HANDLERS.call(0);
}
#[interrupt]
fn SPIM0_SPIS0_TWIM0_TWIS0_SPI0_TWI0() {
HANDLERS.call(1);
}
#[interrupt]
fn UARTE1() {
HANDLERS.call(2);
}
|
