convert to gd32f303 (stm32f103) bluepill variant

1 files changed, 135 insertions, 150 deletions

diff --git a/src/main.rs b/src/main.rs
index dce005a..d0dfe1a 100755
--- a/src/main.rs
+++ b/src/main.rs
@@ -1,191 +1,176 @@
-/*
 #![no_std]
 #![no_main]
 
-mod blink;
+//extern crate panic_semihosting;
+
 mod led;
 mod log;
-mod usb;
-
-use gd32vf103xx_hal::{
-    afio::AfioExt,
-    eclic::{self, EclicExt},
-    gpio::GpioExt,
-    pac::{self, Peripherals},
-    rcu::RcuExt,
-    serial::Serial,
-    time::{Hertz, MegaHertz},
-    timer::Timer,
-};
-use riscv::{
-    asm::wfi,
-    interrupt,
-};
-use riscv_rt::entry;
-use usb_device::prelude::*;
 
 use led::LED;
-use usb::{USB, UsbBus};
 
-static mut EP_MEMORY: [u32; 1024] = [0; 1024];
+use cortex_m::{
+    asm::{bkpt, wfi},
+    interrupt,
+};
+use cortex_m_rt::entry;
+use embedded_hal::spi::{Mode, Phase, Polarity};
+use stm32f1xx_hal::{
+    pac,
+    prelude::*,
+    serial::{Config, Serial, StopBits, WordLength},
+    spi::Spi,
+    usb::{self, UsbBus},
+};
+use usb_device::prelude::*;
+use usbd_serial::{SerialPort, USB_CLASS_CDC};
 
 #[entry]
-fn main(_hartid: usize) -> ! {
-    let p = Peripherals::take().expect("couldn't take peripherals");
-
-    pac::ECLIC::reset();
-    pac::ECLIC::set_threshold_level(eclic::Level::L0);
-    pac::ECLIC::set_level_priority_bits(eclic::LevelPriorityBits::L3P1);
-
-    let mut rcu = p.RCU
-        .configure()
-        .ext_hf_clock(MegaHertz(8))
-        .sysclk(MegaHertz(96))
-        .freeze();
-    let mut afio = p.AFIO.constrain(&mut rcu);
-    let gpioa = p.GPIOA.split(&mut rcu);
-
-    // TODO: figure out how to use the usb serial on the start board.
-    //
-    // this version has to be wired up physically.
-    let serial = Serial::new(
-        p.USART1,
-        (gpioa.pa2, gpioa.pa3),
-        Default::default(),
-        &mut afio,
-        &mut rcu,
+fn main() -> ! {
+    let dp = pac::Peripherals::take().unwrap();
+
+    let mut flash = dp.FLASH.constrain();
+    let rcc = dp.RCC.constrain();
+
+    let clocks = rcc
+        .cfgr
+        .use_hse(8.MHz())
+        .sysclk(72.MHz()) // TODO: gd32 can get up to 120MHz
+        // .pclk1(24.MHz()) // TODO: causes issues with gd32 usb (dropped packets) and garbled usart1 output
+        .freeze(&mut flash.acr);
+
+    assert!(clocks.usbclk_valid());
+
+    let mut gpiob = dp.GPIOB.split();
+    let mut led = LED::new(gpiob.pb2, &mut gpiob.crl);
+
+    let mut afio = dp.AFIO.constrain();
+    let mut gpioa = dp.GPIOA.split();
+
+    let tx_pin = gpioa.pa9.into_alternate_push_pull(&mut gpioa.crh);
+    let rx_pin = gpioa.pa10;
+    let serial = Serial::usart1(
+        dp.USART1,
+        (tx_pin, rx_pin),
+        &mut afio.mapr,
+        Config::default()
+            .baudrate(115200.bps())
+            .wordlength(WordLength::Bits8)
+            .parity_none()
+            .stopbits(StopBits::STOP1),
+        clocks,
     );
-    let (tx, _rx) = serial.split();
+    let (tx, _) = serial.split();
+
     log::init(tx);
 
-    let timer = Timer::<pac::TIMER6>::timer6(p.TIMER6, Hertz(5), &mut rcu);
-    let led = LED::new(gpioa.pa7);
-    let mut blink = blink::Task::new(timer, Hertz(5), led);
+    logln!("luchie started!");
+
+    // cirque spi connections to spi1:
+    //
+    // pb0 - dr
+    // pa4 - ss1
+    // pa5 - clk1
+    // pa6 - miso1
+    // pa7 - mosi1
+
+    let dr_pin = gpiob.pb0;
+    let sck_pin = gpioa.pa5.into_alternate_push_pull(&mut gpioa.crl);
+    let miso_pin = gpioa.pa6;
+    let mosi_pin = gpioa.pa7.into_alternate_push_pull(&mut gpioa.crl);
+    let cs_pin = gpioa.pa4.into_push_pull_output(&mut gpioa.crl);
+    let spi_mode = Mode {
+        phase: Phase::CaptureOnSecondTransition,
+        polarity: Polarity::IdleHigh,
+    };
+    let spi = Spi::spi1(
+        dp.SPI1,
+        (sck_pin, miso_pin, mosi_pin),
+        &mut afio.mapr,
+        spi_mode,
+        1.MHz(),
+        clocks,
+    );
 
-    let usb = USB {
-        usb_global: p.USBFS_GLOBAL,
-        usb_device: p.USBFS_DEVICE,
-        usb_pwrclk: p.USBFS_PWRCLK,
+    // BluePill board has a pull-up resistor on the D+ line.
+    // Pull the D+ pin down to send a RESET condition to the USB bus.
+    // This forced reset is needed only for development, without it host
+    // will not reset your device when you upload new firmware.
+    let mut usb_dp = gpioa.pa12.into_push_pull_output(&mut gpioa.crh);
+    usb_dp.set_low();
+    // let mut delay = dp.TIM2.delay_us(&clocks);
+    // delay.delay_ms(10u8);
+    cortex_m::asm::delay(clocks.sysclk().raw() / 100);
+
+    let usb = usb::Peripheral {
+        usb: dp.USB,
         pin_dm: gpioa.pa11,
-        pin_dp: gpioa.pa12,
-        hclk: rcu.clocks.hclk()
+        pin_dp: usb_dp.into_floating_input(&mut gpioa.crh),
     };
+    let usb_bus = UsbBus::new(usb);
 
-    let usb_bus = UsbBus::new(usb, unsafe { &mut EP_MEMORY });
+    let mut serial = SerialPort::new(&usb_bus);
 
-    let mut usb_dev = UsbDeviceBuilder::new(&usb_bus, UsbVidPid(0x16c0, 0x27dd))
+    let mut usb_dev = UsbDeviceBuilder::new(&usb_bus, UsbVidPid(0xdead, 0xbeef))
         .manufacturer("Fake company")
-        .product("Enumeration test")
+        .product("Serial port")
         .serial_number("TEST")
-        .device_class(0)
+        .device_class(USB_CLASS_CDC)
         .build();
 
-    //let mut serial = SerialPort::new(&bus_alloc);
-
-    unsafe { interrupt::enable() };
-
     loop {
-        let mut can_sleep = true;
-
-        if let Ok(_) = blink.poll() {
-            can_sleep = false;
-        }
-        if usb_dev.poll(&mut []) {
-            logln!("usb");
-            can_sleep = false;
+        logln!(".");
+        if !usb_dev.poll(&mut [&mut serial]) {
+            continue;
         }
 
-        if can_sleep && false {
-            log!("!");
-            unsafe { wfi() };
+        let mut buf = [0u8; 64];
+
+        match serial.read(&mut buf) {
+            Ok(count) if count > 0 => {
+                led.on();
+
+                // Echo back in upper case
+                for c in buf[0..count].iter_mut() {
+                    if 0x61 <= *c && *c <= 0x7a {
+                        *c &= !0x20;
+                    }
+                }
+
+                let mut write_offset = 0;
+                while write_offset < count {
+                    match serial.write(&buf[write_offset..count]) {
+                        Ok(len) if len > 0 => {
+                            write_offset += len;
+                        }
+                        _ => {}
+                    }
+                }
+            }
+            _ => {}
         }
-    }
-}
-#[export_name="ExceptionHandler"]
-fn exception_handler(_frame: &riscv_rt::TrapFrame) -> ! {
-    spin();
-}
-
-#[export_name="DefaultHandler"]
-fn default_handler() -> ! {
-    spin();
-}
 
-#[export_name="MachineTimer"]
-fn machine_timer() {
-    spin();
-}
-*/
-
-#![no_std]
-#![no_main]
-
-mod usb;
-
-use riscv::asm::wfi;
-use riscv_rt::entry;
-use gd32vf103xx_hal::prelude::*;
-use gd32vf103xx_hal::pac;
-
-use usb::{USB, UsbBus};
-use usb_device::prelude::*;
-use usbd_serial::SerialPort;
-
-static mut EP_MEMORY: [u32; 1024] = [0; 1024];
-
-#[entry]
-fn main() -> ! {
-    let dp = pac::Peripherals::take().unwrap();
-
-    // Configure clocks
-    let mut rcu = dp.RCU.configure()
-        .ext_hf_clock(8.mhz())
-        .sysclk(96.mhz())
-        .freeze();
-
-    assert!(rcu.clocks.usbclk_valid());
-
-    let gpioa = dp.GPIOA.split(&mut rcu);
-    let usb = USB {
-        usb_global: dp.USBFS_GLOBAL,
-        usb_device: dp.USBFS_DEVICE,
-        usb_pwrclk: dp.USBFS_PWRCLK,
-        pin_dm: gpioa.pa11,
-        pin_dp: gpioa.pa12,
-        hclk: rcu.clocks.hclk()
-    };
-
-    let usb_bus = UsbBus::new(usb, unsafe { &mut EP_MEMORY });
-
-    let mut serial = SerialPort::new(&usb_bus);
-    let mut usb_dev = UsbDeviceBuilder::new(&usb_bus, UsbVidPid(0x16c0, 0x27dd))
-        .manufacturer("Fake company")
-        .product("Enumeration test")
-        .serial_number("TEST")
-        .device_class(0)
-        .build();
-
-    loop {
-        if usb_dev.poll(&mut [&mut serial]) {
-        }
+        led.off();
     }
 }
 
 #[panic_handler]
 fn panic(info: &core::panic::PanicInfo) -> ! {
-//    interrupt::free(|_cs| {
-//        log!("!!! panic ");
+    interrupt::free(|_cs| {
+        log!("!!! panic ");
         if let Some(loc) = info.location() {
-//            log!("in {}:{} ", loc.file(), loc.line());
+            log!("in {}:{} ", loc.file(), loc.line());
         }
         if let Some(msg) = info.payload().downcast_ref::<&str>() {
-//            log!("⇒ {} ", msg);
+            log!("⇒ {} ", msg);
         }
-//        logln!("!!!");
-//    });
+        logln!("!!!");
+    });
     spin();
 }
 
 fn spin() -> ! {
-    loop { unsafe { wfi() } };
+    bkpt();
+    loop {
+        wfi();
+    }
 }